User manual PARKSIDE KH 3014 SOLDERING IRON WITH HOLDER

[. . . ] C) Keep children and other people away while you are operating the electrical tool. To avoid danger to life from electric shock: a) The mains plug on the device must match the mains socket. Do not use an adapter plug with devices fitted with a protective earth. D) Do not use the mains lead for any purpose for which it was not intended, e. [. . . ] Otherwise your hands may transfer any adhering traces of lead via food or cigarettes into your body. ½ Do not dispose of soldering waste with the household rubbish. Careful handling and use of electrical power tools A) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. Check for broken parts or parts that are damaged to the extent they detrimentally affect the functioning of the device. Many accidents have their origins in poorly maintained electrical tools. Safety advice / Before first use Use of attachments or accessories other than those recommended here could lead to you suffering an injury. Insert the narrower end of the helical spring 3 into the opening of the multifunctional holder 7 . Turn the helical spring 3 clockwise to fix the multifunctional holder 7 in place. 2 or a copper attachment 9 10 11 may only be done when the appliance has been switched off and the soldering tip or attachment has cooled down. All soldering tips and attachments have a screw thread and can, therefore, be easily and quickly replaced on the soldering pencil 1 . Switching off: Pull the plug out of the mains socket to switch off the device. The clips on the third hand 5 can become hot while you are soldering the workpiece. The hot soldering tip 2 must never be placed in contact with a dry solder sponge 8 , otherwise the solder sponge may be damaged. The design of the soldering pencil makes it especially suitable for use where access is difficult or for fine soldering work. After cleaning the tip 2 it must be "tinned" (coated with solder). Continue to feed further solder until the whole joint has a covering of solder. Then quickly remove the soldering tip in order to avoid overheating the molten solder. Allow the solder to harden while not subjecting it to vibration or movement. note: The flux is either already contained in the solder or applied separately. Ask the advice of the retailer when buying solder in order to choose the most suitable solder for your intended purpose. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. [. . . ]