User manual PARKSIDE BJ 2002

[. . . ] Operating and safety instructions 2002 Operating instructions Page 4- 7 Kompernaß Handelsgesellschaft mbH Burgstraße 21 · D-44867 Bochum (Germany) · ² ¶ ³ a) b) c) d) ´ e) » f) g) h) i) k) l) m) n) o) p) ¶ ² ¿ TECHNICAL INFORMATION MAINS ADAPTER: Nominal voltage: 230 V ~ 50 Hz Nominal output voltage: 24 V Nominal current: 1050 mA MINI DRILL: Length: Weight: Nominal speed: Approx. 6. 3 watts 10. 0 watts 20. 0 watts 40. 0 watts Power consumption: No-load power consumption at minimum speed: No-load power consumption at maximum speed: Power consumption with saw blade in saw mode at minimum speed: Power consumption with saw blade in saw mode at maximum speed: OPERATING FEATURES ³ · » ¿ ON / OFF switch Speed controller Cable to mains adapter Mains adapter ´ ² ¶ Hanger Spindle lock Chuck IMPORTANT SAFETY ADVICE Note: In the interests of your own safety please read through the following safety advice carefully and make yourself familiar with all the functions of the equipment. In addition, you must also read the advice in the accompanying booklet called "Safety advice" before using the equipment for the first time. [. . . ] The brass brushing disc does not create sparks and is softer than steel. This ensures that the tools do not leave behind any scratches on softer materials and thus are very suitable for gold, copper, brass and other precious metals. Material Shell/stone Steel Aluminium etc. ­ low Controller setting Speed ranges: MILLING Attachments: Areas of use: Figure h): 3 milling bits The 3 milling bits are suitable for high speed milling of various materials. Use these attachments particularly for miscellaneous types of work such as recessing, carving, shaping, grooving or chasing (see Fig. ­ low low ­ medium low ­ medium Controller setting Speed ranges:: 5 POLISHING Attachments: Areas of use: Figure k): 3 polishing pads The polishing pads can be used for most metals and plastics (see Fig. They are particularly suitable for precious metals like gold or silver. When polishing you must always use very light pressure only. Material Steel Aluminium and precious metals Speed min. ­ low Controller setting Speed ranges: DRILLING Attachments: Areas of use: Speed ranges: Figure m): 6 universal HSS drills The drills, sized 0. 8, 1. 0, 1. 2, 1. 4, 1. 6, 1. 8, are suitable for metal and plastic (see Fig. ­ low low high Controller setting CHUCKS Chucks: Areas of use: Figure o): 2 attachment clamps with threaded connection , 4 collet chucks diameters, some also fit the special tools in various The range of chucks and clamps ensures that the special attachments can always be fitted as required. They guarantee that the tool is securely held and that you will obtain the best results. Attachment clamp with threaded connection for: Saw blade , cutting disc , Silicon grinding disc (green) , corundum grinding disc (red) , polishing pads 2. 3 mm collet chuck (standard collet chuck) for: , "diamond bits" silicon grinding point (green) , corundum grinding point (red) , 1 plastic brush , 1 plastic brushing disc , brass brushing disc , milling bits , HSS drills 1. 2, 1. 4, 1. 6, 1. 8 (for 0. 8 and 1. 0 drills please use the corresponding size of collet chuck). 6 INSERTING / CHANGING CHUCKS WARNING: Pull out the mains plug before changing attachments. Unscrew the chuck ¶ and replace it with another chuck or clamp. INSERTING TOOL / ATTACHMENTS IN CHUCK WARNING: Pull out the mains plug before changing any attachments. Insert attachments so that as little as possible projects beyond the end of the chuck. Too long a projecting tool shaft bends easily and can lead to vibrations. TIPS AND TRICKS · Do not exert use too much force when using your model-making and engraving set. [. . . ] The equipment was produced with the greatest of care and underwent thorough testing before delivery. In the unlikely event of detecting a functional defect, please return the equipment in its original packaging with the proof of purchase (if available) to the closest service address. Damage caused due to improper handling as well as regular wear of the parts are not covered by this warranty. Beaver Electronic Services · The Lodge, Premier Business Park Long Street, Walsall · West Midlands, WS2 9DY Tel. : 0 19 22/72 55 54 · Fax: 0 19 22/72 54 17 8 9 © manual design, photos, translations by ORFGEN Marketing & Communication Essen · Germany www. orfgen-nm. de [. . . ]