User manual PANTECH G900

[. . . ] Display Dual clamshell TFT LCD (both internal and external LCDs) Internal LCD : 260, 000 TFT color display (128 X 160) External LCD : 260, 000 TFT color display (128 X 160) Animation message and variable Icon Melody 64 poly orchestra music bell sound Camera Highly sensitive digital camera. Dimension & Weight 87. 3*46. 5*22 mm with a slim battery 90g with a slim battery Performance Talk time: up to 210 minutes (with 780 mAh battery) Standby time: up to 200 hours (with 780 mAh battery) Operating Frequency GSM 900MHz / GSM 1800MHz Dual band Some of the contents in this User Manual would differ from that in your phone. It may differ depending on the S/W version and the network provider you subscribed to. 1 For your safety and proper operation of the mobile phone, please read the following information carefully and observe the simple guidelines provided. Using such antenna may cause malfunction or serious damage to the phone. Electronic Devices RF signals emitted from your mobile phone may adversely affect the electronic devices that are inadequately shielded from such signals. Traffic Safety You should check and observe local traffic regulations before using your mobile phone. [. . . ] Auto power alarm T T Own number T T T If the alarm has been set through the "auto power alarm on/off", and the phone power turned off, the alarm will ring at the time set by the user while the phone power is turned on automatically. After the alarm, the phone handset power will be turned off automatically. On : Auto Power alarm On Off : Auto Power alarm Off Answering Machine T T This option allows you to input, save, and edit your own phone numbers. If no phone number has been saved, the `List empty' screen will appear. If you press the [ ]key at this stage, the Edit screen will appear to allow you to edit phone numbers. Once the numbers are entered and saved, they will be stored in your phone. If you already have a phone numbers stored, press the [ select one of the following functions. (Note : You can save up to two Own Numbers. ) 66 ]key and A unique feature of Pantech mobiles is the Answering Machine function, by which a user can record up to 10 messages. The user can also overhear the recording and can choose to accept or reject the call. On/Off You can turn on or off the answering machine by selecting this button. Use the down arrow key to go to the required selection and press the right or left arrow key to confirm selection. 67 Press [ ] button to exit menu. When the answering machine is activated, a "mike" icon appears on the idle screen. User Message Select this key to hear the recorded message. In case the user wishes to delete the recording, press [ ] key and select "delete". Message can be re-recorded by selecting the "Recording" key again. If message is deleted, the answering machine is reset to "absent" mode. ("I am not available right now, please leave a message after the tone") Response Time By selecting this key, one can set the response time before which the answering machine becomes activated. Use the down arrow key to go to the required selection and press the right or left arrow key to confirm selection. Press [ ] button to exit menu. Recorded Message This key is selected to hear all recorded messages. To listen to the recorded messages, select the recorded message by moving the [ ][ ]key and press [ ] button on the selected message. The answering machine will not work when full capacity is reached (10 messages). Users can listen to the message being recorded by hearing into the earpiece and can connect to the call any time during the recording by pressing the [ ] button. Whenever a message is recorded, a "Recorded Message" sign giving the number of recorded messages is displayed on the sub-LCD. A "Audio-cassette" type icon appears on the idle screen, in case there any unread/ unheard messages among the recorded messages. 69 Response Message This key enables the user to choose between a set of 3 predefined messages and one user defined message as their choice of response message, when an incoming call is received. Absent : "I am not available right now, please leave a message after the tone. " Meeting : "I am in a meeting right now, please leave a message after the tone. " Driving : "I am driving right now, please leave a message after the tone" User defined message is a message that the user can record by themselves. [. . . ] The battery can be short-circuited when it contacts with a conductive object. (???) Dispose and recycle used batteries in accordance with local regulations. In order to prevent injury or burns, ensure that a metal object does not come into contact with the + and terminals of the battery. 129 Road Safety Remember that safety always comes first when you drive. If unavoidable to use the phone, park the vehicle before making a call. [. . . ]