User manual PANTECH G600

[. . . ] FEATURE SPECIFICATIONS Display Dual clamshell TFT LCD (both internal and external LCDs) Internal LCD : 260, 000 TFT Color Display (128 X 143) External LCD. . . . : 260, 000 TFT Color Display (96 X 64) Animated messages and icons Melody 64 poly orchestra musical bell sound Camera Highly sensitive digital camera with flash Dimensions & Weight 80*40*20. 9mm with a slim battery Less than 80g (target) with a slim battery Battery Performance Talk time: Up to 180 minutes (with a 680 mAh battery) Standby time: Up to 200 hours (with a 680 mAh battery) Operating Frequency GSM 900MHz / DCS 1800MHz dual band Some of the contents in this User Manual would differ from that in your phone. It may differ depending on the S/W version and the network provider you subscribed to. 1 FOR YOUR SAFETY For your safety and proper operation of the mobile phone, please read the following information carefully and observe the simple guidelines provided. For detailed information, please refer to the Appendix. FOR YOUR SAFETY Medical Devices Turn off your mobile phone in hospitals or healthcare facilities and make sure to observe facility rules and regulations. Consult a physician or the manufacturer of the medical device if you have any questions about using your phone in a hospital or healthcare facility. Antenna Do not use any antenna not authorized by Pantech. [. . . ] To access this function, select the recorded message to which the voice call/ SMS needs to be made or sent, then press the [Menu] button, and select "Call" or "Send message". Shortcut In idle screen, press the side volume "up"key (short press) to access the answering machine function. If the answering machine is activated, users can accept an incoming call any time by pressing the [ ] button when the phone rings or a message is being recorded. This feature allows you to hear all the recorded messages. To listen to the recorded messages, select a recorded message by moving the down/ up arrow key and press the [ ] button on the selected message. ] To delete the recorded message, press the [ button and select "Delete". A maximum of 10 messages can be recorded in the answering machine. The answering machine will not work when the full capacity is reached (10 messages). Users can listen to the message being recorded with the earpiece, and can accept the call any time during the recording by pressing the [ ] button. Whenever a message is recorded, a "Recorded Message" sign indicating the number of recorded messages is displayed on the external LCD. When the phone flip is opened, the internal LCD gives the same display. A "Audio-cassette" type icon appears on the idle screen, in case there exist any unread/ unheard messages among the recorded messages. 80 81 NET SERVICES Divert calls Divert calls - diverts calls to another number according to user's settings. NET SERVICES When busy Call diversion when line is busy - this diverts calls to another number set when a user's line is busy. The procedure of setting this is the same as the one explained in 1. 1. All calls Divert all calls - sets other numbers to which voice calls, receiving data, fax or message service are diverted. On : This sets call diversion for all calls. If you press On, the screen saying "Input a number to be diverted" will appear. Off : This cancels the setting of "Call diversion for all calls". By service : You can set call diversion for all 4 services [1], or set call diversion for each service [2][3][4][5]. You also can select all services except for message service [6]. On no answer Call diversion when you do not take calls - This diverts calls to another number set when you can not take calls within 5 to 30 seconds set by them. 1 82 83 NET SERVICES When not found NET SERVICES Call Settings This sets additional functions used for making or taking calls. Call diversion when you are out of the network service area. - This diverts calls to another number set when you are out of the network service area. 1 Answer type Answer type - sets the incoming call receiving mode. Flip open To take incoming calls, open the phone flip. Cancel all Send key To take incoming calls, press the [ ] key. You can cancel all options currently set - all settings regarding call diversion are cancelled. Any key To take incoming calls, press any key except for the [ Auto answer For incoming calls, this will automatically connect after 10 seconds of ringing, ] key. 84 85 NET SERVICES Call waiting This alerts you that there is another call coming in when you are already in a conversation with a caller. NET SERVICES Network settings Preferred N/W Set preferred Network - When the network list currently provided by handset is displayed, press the [MENU] key. Then the sub options as follow will appear. Caller number Displays telephone number - this displays the numbers of names of receivers and callers. This function varies according to the settings such as the existence of your service registration, or of callers' settings. - Insert: this adds the preferred network to the top of the current list. - Add to end : this adds the preferred network to the end of the current list - Delete: this deletes the contents of selected networks. Units have had the profiles of the various dealers of every country saved on them. [. . . ] Leaving the battery in hot or cold places, especially inside a car in summer or winter conditions, may reduce the capacity and life of the battery. The battery can be short-circuited when it contacts with a conductive object. Dispose and recycle used batteries in accordance with local regulations. In order to prevent injury or burns, ensure that a metal object does not come into contact with the + and - terminals of the battery. When you are unable to input data into the Phonebook: Your Phonebook memory may be full. [. . . ]