User manual PANTECH G500

[. . . ] CHARACTERISTIC SPECIFICATION Display Dual clamshell TFT LCD both Main&Sub. Main LCD : 260, 000 TFT Color Display (128 X 160) Sub LCD : 260, 000 TFT Color Display (128 X 128) Melody 64 Polyphonic Ringtone Camera High Resolution Built-in Camera (310K Pixels) Dimension & Weight 85*41*22mm with Slim Battery 90g with Slim Battery Performance Talk time: up to 210minutes (with 780 mAh Battery) Standby time:up to 200 hours (with 780 mAh Battery) Operating Frequency GSM 900MHz / DCS 1800MHz Dual Band Some of the contents in this User Manual would differ from that in your phone. It may differ depending on the S/W version and the network provider you subscribed to. 1 CAUTION Please check and follow simple guidelines below for your safety and proper operation of the phone. CAUTION MEDICAL DEVICES Switch the phone off in hospitals. Switch the phone off to avoid interference with pacemaker, or even other medical devices. Consult a physician or the manufacturer of the medical device if you have any questions about using the phone in hospital. ANTENNA Using unapproved antenna can cause severe damage or malfunction to the phone. [. . . ] Voice equalizer ; On/Off Auto backlight This activates the sub-LCD regularly when the phone is closed. Use Navigation [ ][ ]Keys to move up and down to the mode you want to change and then use Navigation [ ][ ]keys to change the value. Each has 8 levels. 60 61 SETTINGS Backlight You can set the Light Level of Main Sub LCD. SETTINGS Date&Time ® T ® T 1 Use Navigation [ ][ ]Keys to move up and down to the mode you want to change and then use Navigation [ ][ ]keys to change the value. 1. You can set the brightness of LED Back light . Set time Press [ ]key after you input the time you wish to set 2. You can set the brightness of the LED Back light while it is off after the Light Duration is expired. (Always off, On for 5 secs, On for 10 secs, On for 20 secs, Always on) Set date Setting up the present date Press [ ]key and store when you move the cursor to the date you wish to set. 62 63 SETTINGS Set time zone Showing the world wide time differences with present time. SETTINGS Language Select the language to be displayed. Press [ you want. ]key and store when you choose the time zone Choose one from the lists, and press [ <Information> when choosing Automatic, it chooses the Language Preference stored in your SIM. ] key. Display Reset setting Restore the default values for the settings. Set the time format as 12 hour or 24 hour. Choose the display as Time only, Date only, or Date & Time. Press [ ]key to save preferred options. Input the handset password, and press [ ]key when the "Restore factory setting?" pop up shows, the default values are restored into, and then the phone reboots. 64 65 SETTINGS Information SETTINGS Software version To check the software version, press [ software version is displayed ] and the Own number You can input, edit, store, and delete your own phone number. Auto power alarm If there is no number stored, "List empty" message appears. With the number(s) listed, press [ want. 1. Edit :modify and edit the number. <Information> you can input up to 2 Own numbers . If the phone is off with this function on, it automatically turns on to ring at the saved time. ] key and select a menu you 66 67 NET SERVICES Some of the functions in this section are network dependant. Therefore, please check with your network provider whether they support these services. NET SERVICES When busy Calls are diverted when your handset is already connected to anothercall. Divert calls Divert calls - With this option, you can forward your incoming calls to number In case you want to divert call, the call waiting function needs to be setted earlier. All calls Divert all calls. -You can all voice calls, data, fax and messages to another number. On : Select ON to forward all the services provided by the network, voice calls, data, fax, and messages. If you select "On", you should enter a number to which you wish to direct. After entering the number, you should enter a waiting time just before directing a call and press [ ] to send the configuration to the network. By service : You can use your handset to divert a specific type of call to another number if your network supports this feature. "All services" [ ] enables all calls to divert and you can choose one of the services, "Voice calls"[ ], "Data" [ ], "Fax"[ ] or "Messages"[ ]. Choose "All except msgs"[ ] to divert except the messages service. On no answer This option allows you to divert the calls to a designated number when the phone is not answered within a certain time; time from 5 to 30 seconds. 68 69 NET SERVICES When not found Divert the calls when your handset is out side the network coverage area. NET SERVICES Call Settings This function sets the way in which a call is received/ made. ® T ® T ® T Answer type This key specifies the answering mode when a call is received. Cancel all You can cancel all the diverts by using this option. Flip open : Select "Flip open" to connect the incoming call when the phone is flipped open. Send key : The incoming call is connected when the [ ] key is pressed. Any key : The incoming call is connected when any key except [ ] key is pressed. Auto answer : The incoming call is automatically connected after 10 seconds 70 71 NET SERVICES Call waiting Your handset can alert you when you°Øve got a second call while you are already engaged in a call. NET SERVICES Network setting ® T ® T ® T ® T ® T On : Setting up Call waiting. Off : Canceling Call waiting Status Preferred N/W With this function, you can set preferred list of network service providers. . Caller number You can see the number of the incoming call (You can see the name of the caller if it's saved in the phonebook) or you can show your number to the caller when making a call. This service is network dependent so please ask your Network Provider. Press [ ] key to see the following sub-options; Insert : add the network to the top of the preferred network list Added to end : adds the network to the end of the preferred network list Delete : delete the network name Show my no. (on, off, set by network) : Select this option if you want to show your number to the recipient. Show called no : Select this option if you want to show your number to the recipient's diverted phone Hide if called : Select this option if you do not want to show your number to the recipient's diverted phone. Add new N/W You can make the list by entering network service provider code. This function has following sub-options to select when you press [ ] Add : Enter the country code, network code, and network name as they are requested, and this can include new networks whose network codes are not known to the handset. Change : Choose a network name to change and then enter the network code, country code, and ne twork name newly to change the network. [. . . ] Do not leave the battery in hot or cold places, such as in a car in summer or winter. Accidental short-circuiting can occur when a conductive object contacts both contact directly. To prevent injury or burns, don't allow metal objects to contact or short circuit the battery terminals. Don't discard the Battery Pack into to fire. Unable to input data in the Phonebook Your phonebook memory is full. [. . . ]