User manual PANTECH G200

[. . . ] CHARACTERISTIC SPECIFICATION Display Dual clamshell TFT LCD both Main&Sub. Main LCD : 65, 000 TFT Color Display (128x160) Sub LCD : B&W Display(96x48) Melody 32 Polyphonic Ringtone Dimension & Weight 85x41x22mm with Standard Battery 85g with Standard Battery Performance Talk time: up to 180minutes (with 680 mAh Battery) Standby time:up to 150hours (with 680 mAh Battery) Operating Frequency GSM 900MHz / DCS 1800MHz Dual Band Some of the contents in this User Manual may not exactly explain your phone. It may differ depending on the S/W version and the Network provider you subscribed to. 1 CAUTION Please check and follow simple guidelines below for your safety and proper operation of the phone. CAUTION MEDICAL DEVICES Switch the phone off in hospitals. Switch the phone off to avoid interference with pacemaker, or even other medical devices. Consult a physician or the manufacturer of the medical device if you have any questions about using the phone in hospital. [. . . ] <Font color> You can change the color of all the text in the handset. There are Red, Blue, Green, and Dark gray including Default color. 1 You can choose display options for the handset idle screen. There are three option as shown below. -Move to category : [ -Select categories : [ ][ ][ ] ] Screen option : You can change the display image of idle screen. Display string : You can change the text to be displayed in idle screen. Font color : You can change the font color in handset. <Screen option> You can choose one of 4 images to be displayed by using [ ][ ] key. You can set the user define image in Fun&Tool\download\set as wallpaper. 58 59 SETTINGS Greeting You can write a greeting message. SETTINGS Backlight You can set the Light Level of Main Sub LCD. 1 Use Navigation [ ][ ] Keys to move up and down to the mode you want to change and then use Navigation [ ][ ] keys to change the value. 1. You can set the brightness of LED Back light while it is on. Contrast You can set Main LCD Brightness, Main LCD contrast, Sub LCD contrast. 2. You can set the brightness of the LED Back light while it is off after the Light Duration is expired. Light duration 1 Use Navigation [ ][ ] Keys to move up and down to the mode you want to change and then use Navigation [ ][ ] keys to change the value. (Always off, On for 5 secs, On for 10 secs, On for 20 secs, Always on) 60 61 SETTINGS Date&Time ®T SETTINGS Set time zone Showing the world wide time differences with present time. Set time Press [ ] key when you choose the time zone you want. ] key after you input the time you wish Press [ to set Display Set date Setting up the present date Set the time format as 12 hour or 24 hour. Choose the display as Time only, Date only, or Date & Time. Press [ ] key when you move the cursor to the date you wish to set Press [ ] key and storeto save preferred options. 62 63 SETTINGS Language Select the language to be displayed. SETTINGS Information Choose one from the lists, and press [ ] key. Own number You can input, edit, store, and delete your own phone number. <Information> When choosing Automatic, it choosess the Language Preference stored in your SIM. If there is no number stored, "List empty" message appears. With the number(s) listed, press [ ] key and select a menu you want. 1. <Information> You can input up to 2 own numbers. Reset settings Restore the default values for the settings. Input the handset password, and press [ ] key when the `Restore factory setting?' pop up shows, the default values are restored into, and then the phone reboots. 64 65 SETTINGS Software version To check the software version, press [ and the software version is displayed ] NET SERVICES Some of the functions in this section are network dependant. Therefore, please check with your network provider whether they support these services. Divert calls Divert calls - With this option, you can forward your incoming calls any designated number. All calls Voice LED Divert all calls - You can all of voice calls, data, fax and messages to another number. Auto power alarm If the phone is off with this function on, it automatically turns on to ring at the saved time. On : Select ON to forward all the services provided by the network; voice calls, data, fax, and messages. If you select "On", you should enter a number to which you wish to direct. After entering the number, you should enter a waiting time just before directing a call and press [ ] to send the configuration to the network. By service : You can use your handset to divert a specific type of call to another number if your network supports this feature. "All services" [ ] enables all calls to divert and you can choose one of the services, "Voice calls"[ ], "Data" [ ], "Fax"[ ] or "Messages"[ ]. choose "All except msgs"[ ] to divert except the message. 66 67 NET SERVICES When busy Calls are diverted when your handset is already connected to another call. NET SERVICES When not found Divert the calls when your handset is out side the network coverage area. ®T In case you want to divert call, the call waiting function needs to be setted earlier. Cancel all On no answer This option allows you to divert the calls to a designated number when the phone is not answered within a certain time; time can be set from 5 to 30 seconds. You can cancel all the diverts by using this option. 68 69 NET SERVICES Call settings This function sets the way in which a call is received/ made. NET SERVICES Call waiting Your handset can alert you when you've got a second call while you are already engaged in a call. Answer type This key specifies the answering mode when a call is received. Caller number You can see the number of the incoming call (You can see the name of the caller if it's saved in the phonebook) or you can show your number to the caller when making a call. This service is network dependent so please ask your Network Provider. Flip open : Select "Flip open" to connect the incoming call when the phone is flipped open. [. . . ] Battery lifetime is about hundreds times in charging and discharging, but it will gradually wear out. Use only approved battery and recharges your battery only with approved chargers. Do not leave the battery in hot or cold places, such as in a car in summer or winter. Accidental short-circuiting can occur when a conductive object contacts both contact directly. [. . . ]