User manual PANTECH C120

[. . . ] USER S MANUAL MANUAL DEL USUARIO 5U010125000 REV00 5U010125000 REV00 3 USER'S MANUAL C120 Thank you for choosing the Pantech C120, our latest triband GSM mobile phone. From its light weight and reliability, to the builtin camera, we know you will enjoy all the features the C120 has to offer. The C120 user guide contains important information about using your handset. Please read the manual thoroughly, pay attention to the warranty on the back page and be alert to the exclusions and limitations of your warranty, related to the use of unauthorized components. [. . . ] These are used by Cingular to send connection details directly to your phone. Press the [Menu] Soft key, select 4. MEdia Net, and then select 4. Profiles. To select a profile, highlight it in the Profile List then push in on joystick. To edit a profile, select it in the Profile List then press the [Edit] Soft key to select from the following functions. ·Profile Name: Push in on joystick to change the profile 55 060518_C120_EN. indd 55 2006. 5. 18 11:19:34 AM MEdia Net name. ·Home URL: Push in on joystick to edit the Homepage URL provided by Cingular. ·GSM Settings: This function allows you to set the GSM network proxy by inputting the following information. ·Gateway/Proxy: If you set the Connection Type to WAP, Gateway is displayed. Push in on joystick to display the subfunctions such as IP Address and IP Port, then input the appropriate information for each of the following subfunctions, inputting the information provided by Cingular. ·Data Call Type: Push the joystick Left [l] or Right [r] to select ISDN or Analogue. ·Dial Number: Push in on joystick to input the appropriate dialup number. ·Login ID: Push in on joystick to input the appropriate login ID. ·Password: Push in on joystick to input the appropriate password. ·GPRS Settings: This menu allows you to set the GPRS network proxy by inputting the following information. ·Gateway/Proxy: If you set the Connection Type to WAP, Gateway is displayed. Push in on joystick to display the subfunctions such as IP Address and IP Port, then input the appropriate information for each of the following subfunctions, inputting the information provided by Cingular. ·Access Point: Push in on joystick to input the appropriate APN. ·Login ID: Push in on joystick to input the appropriate login ID. ·Password: Push in on joystick key to input the appropriate password. ·DNS Settings: Input the appropriate IP address for the Domain Name Server. NOTE This function is available only when your Connection Type is set to HTTP. ·Bearer: Select the bearer type for each type of network access. [. . . ] When it is ON, it receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for mobile devices. Those guidelines are consistent with safety standards previously set by both U. S. and international standards bodies: American National Standard Institute (ANSI), National Council of Radiation Protection and Measurements(NCRP), and International Commission on Non-Ionizing Radiation Protection (ICNRP). [. . . ]