User manual PANASONIC SDR-T70P

[. . . ] Owner's Manual SD Video Camera Model No. SD/HDD Video Camera Model No. SDR-S70P/PC SDR-S71P/PC SDR-T70P/PC SDR-H100P/PC Before connecting, operating or adjusting this product, please read the instructions completely. Guía para rápida consulta en español está incluida. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www. panasonic. ca VQT3E42 Things You Should Know Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. [. . . ] The memorized resume position is cleared if you turn off the power or change the mode. (The setting of [RESUME PLAY] does not change. ) 66 VQT3E42 Playback Playback 2 Still picture playback 1 2 Change the mode to . SDR-T70 Use the joystick to select the Play Mode Select icon A, then press the center of the joystick. Select [SD CARD]/ [Built-inMemory] and [PICTURE], then press the center of the joystick. 3 SDR-S70 / SDR-S71 SDR-H100 Select [PICTURE], then press the center of the joystick. Select [SD CARD]/[HDD] and [PICTURE], then press the center of the joystick. Select [ENTER], then press the center of the joystick. Press the MENU button to cancel the settings. 67 VQT3E42 4 Select the still picture to be played back, then press the joystick. Change the thumbnail display During step 4, the thumbnail display changes in the following order if the zoom lever is operated to side or side. 20 still pictures () 9 still pictures () 1 still picture The operation icon will be displayed or hidden each time the center of the joystick is pressed. Next (previous) page can be displayed by selecting / . 5 Select the playback operation with the joystick. 9 still pictures display returns if the power is turned off or the mode is changed. Still picture compatibility This unit is compliant with the unified standard DCF (Design rule for Camera File system) established by JEITA (Japan Electronics and Information Technology Industries Association). (Not all JPEG formatted files will be played back. ) This unit may degrade or not play back still pictures recorded or created on other products and other products may degrade or not play back still pictures recorded on this unit. 1/;: 2;: ;1: : Slide show (playback of the still pictures in numerical order) start/ pause. Stops the playback and shows the thumbnails. 68 VQT3E42 Playing back still pictures by date Still pictures recorded on the same day can be played back in succession. Changing the playback setting and playing back the slide show 1 1 Select the date select icon and press the joystick. Select joystick. and press the A Date select icon 2 Select the desired item and press the joystick. 2 3 Select the playback date, then press the joystick. The still pictures recorded on the date selected are displayed as thumbnails. [DATE SETUP]: Select the desired playback date. [SLIDE INTERVAL]: Select the playback time display interval. Select the still picture to be played back and press the joystick. (When [DATE SETUP] has been selected) Playing back of all the still pictures returns if the power is turned off or the mode is changed. Even if still pictures are recorded on the same day, they are grouped separately in the following cases. j When the number of still pictures exceeds 999 is displayed after the date in the list by date for the still pictures created from the motion picture. (l 64) Select the desired playback date, then press the center of the joystick. (When [SLIDE INTERVAL] has been selected) Select the playback interval, then press the center of the joystick. [SHORT]: Approx. 15 seconds 3 Select [START], then press the center of the joystick. 69 VQT3E42 Playback Editing 1 . Deleting scenes/still pictures Deleted scenes/still pictures cannot be restored, so perform appropriate confirmation of the contents before proceeding with deletion. ¬ Change the mode to To delete by confirming images being played back Press the button while scenes or still pictures to be deleted are being played back. Deleting multiple scenes/still pictures from the thumbnail display 1 2 Press the button while the thumbnail view screen is displayed. Select [SELECT] or [ALL SCENES] and press the joystick. 3 (Only when [SELECT] is selected in step 2) Select the scene/still picture to be deleted, then press the joystick. A scene or still picture will be selected, and will be displayed. Up to 99 scenes can be selected to be deleted. 4 When [ALL SCENES] is selected, all the scenes or still pictures on the selected media will be deleted. (In case of playing back scenes or still pictures by date, all the scenes or still pictures on the selected date will be deleted. ) Protected scenes/still pictures cannot be deleted. (Only when [SELECT] is selected in step 2) Select [Delete] and press the joystick or press the button. To continuously delete other scenes/still pictures, repeat steps 3-4. 70 VQT3E42 When you stop deleting halfway Press the MENU button while deleting. The scenes or still pictures that have already been deleted when the deletion is canceled cannot be restored. Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them. ) To complete editing Press the MENU button. You can also delete scenes by pressing the MENU button, selecting [EDIT SCENE] # [DELETE] # [ALL SCENES] or [SELECT]. You can also delete still pictures by pressing the MENU button, selecting [PICT. Scenes/still pictures which cannot be played back (the thumbnails are displayed as ) cannot be deleted. In case of [ALL SCENES], the deletion may take time if there are many scenes or still pictures. [. . . ] 3) Cerrar bien la tapa de la tarjeta SD. Cómo encender la unidad A Introduzca la batería hasta que dispare y se cierre. Encender y apagar el dispositivo con el botón de alimentación Pulse el botón de alimentación para encender el dispositivo. Cómo cargar la batería 1 Conectar el adaptador de CA al terminal de entrada de CC de esta unidad. 2 Conectar el cable de CA al adaptador de CA, luego a la salida de CA. El indicador de estado A parpadeará de color rojo en un intervalo de 2 segundos, indicando que comenzó la carga. A El indicador de estado se ilumina. [. . . ]