User manual PANASONIC SC-BTT270 Easy Setting Guide

[. . . ] Easy Setting Guide The order of setting Blu-ray DiscTM Home Theater Sound System Model No. SC-BTT270 1 1 Prepare the speakers See below 2 Place the speakers See below 3 Connect the cables See over 4 Turn on the main unit See over Easy setup See Easy setup screen Prepare the speakers 2 Refer to the rear label of the speaker before connecting the corresponding cable. [. . . ] : White : Blue line PURPLE GREEN RED Recommended Front speakers (L, R) Surround speakers (LS, RS) White 60 PUSH! Blue line 120 VQC8348 F0211SB0 3 Connect the cables GREEN RED WHITE GREY It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV. For detailed information, refer to the operating instructions. Other connection Broadband Network Connections By connecting this unit to the network, you can optimise the internet features of this unit. · Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices. · When using the wireless LAN function*2, the LAN cable that connected to the main unit is not necessary. *2 South East Asia (For Malaysia, Thailand, Singapore and Hong Kong) only e. g. , For South East Asia Connect the cables by colour or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. BLUE FM indoor antenna (supplied) Adhesive tape PURPLE LAN SUBWOOFER CENTER FRONT SURROUND 3 6 3 5 2 1 R 3 L 4 3 R 3 L FM ANT 75 AUX Main unit LAN cable (not supplied) Main unit HDMI (ARC) HDMI cable (not supplied) (Recommended for highest quality picture) HDMI If the HDMI terminal is labeled "HDMI (ARC)", you can enjoy TV sound and pictures with a single HDMI cable. [. . . ] Main unit 1 Connect the AC mains lead 2 Turn on the TV 3 Turn on the main unit 4 The Easy setup starts Before connecting the AC mains lead; Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. Set the voltage at the bottom of the main unit. 110 127V 220 240V Easy setup Would you like to start easy setup? Yes No VOLT ADJ AC Voltage selector AC mains lead (supplied) Use a flat-head screwdriver to move the voltage selector to the appropriate position for the area in which this system is used. Installing batteries in the remote control R6/LR6, AA OK RETURN Press [, ] to select [Yes] and press [OK]. To a household mains socket [. . . ]