User manual PANASONIC RR-XS400

[. . . ] For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday-Thursday 9:00 a. Or go on line through our Internet Accessory ordering application at www. [. . . ] to clear the display , change the settings to "OFF" , or set the timer again. : When the repeat setting is "DAILY" or "SELECT", this is displayed if the timer recording (playback) fails. * When the timer scheduled time comes , the scheduled operation is performed. If the unit has been off before the scheduled operation, the power is turned on and the timer operation is performed. When the power is off at timer playback time, the file playback starts a little behind the scheduled time. * When the scheduled time arrives while the unit is on · timer playback will not be performed. (excluding the case when the unit is stopped) · timer recording will be performed. However, if recording is in progress at the scheduled time, the recording takes priority and the timer recording is not performed. * During timer recording (playback), operations other than stop operation, power operation and volume adjustment cannot be performed. * After setting the file to be played for timer playback, if the set file is deleted, the alarm sounds for approx. * When the file length of the specified file is shorter than the period from timer start time until timer end time, the timer playback is stopped before the timer end time set for the timer playback. (If the repeat setting is set to items other than "OFF", the selected file is repeatedly played back with 1 track repeat until the end time. * When the file playback is assigned as playback source, the files are played back at the scheduled time with the playback settings (SOUND EQ ( page 38) etc. ) which have already been set when the timer playback setting was made. Repeat play ( page 36) at the timer playback is 1 track repeat playback regardless of the setting contents. (excluding the case when the repeat setting is OFF) * When MIC or LINE is assigned as recording source, the recording is made at the scheduled time with the recording settings (microphone sensitivity ( page 21), the line input setting ( page 30), etc. ) which have already been set when the timer recording setting was made. (excluding the recording mode ( page 20)) * If the clock setting (DATE & TIME) is returned to the factory setting, the timer operation setting (SETTING) is automatically turned OFF. When "ON" is selected, press +, ­ to select your preferred volume and press [q OK] to enter. You can choose whether to set the recording indication light ON or OFF. * Even if it is set to OFF, REC LED lights on (blinks) as a status indicator while charging or editing files. ) * If the type of battery and setting do not match, the battery indicator is not displayed correctly. [. . . ] Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or labour, if in the opinion of Panasonic, the product is found to be faulty within the warranty period. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only where the products are used and serviced within Australia or it's territories. [. . . ]