User manual PANASONIC LOGO TRANSFER SOFTWARE 2.0 FOR WINDOWS

[. . . ] Operating Instructions Logo Transfer Software 2. 0 Windows M1010KT0 -PS TQBH9021(E) Table of Contents Read This First. 3 The number of LOGOs, the maximum pixel size and colors you can register . 18 If the LOGO data cannot be enlarged and edited in the projector . 32 Read This First This operation manual is for the Logo Transfer Software . [. . . ] IP Address Enter the IP address which is set in the projector to connect . Port Enter the command port number which is set in the projector to connect . Account Enter the account name which is set in the projector to connect . ­ 13 ­ Connect via LAN (cont. ) Password Enter the password which is set in the projector to connect . Note · You can confirm the IP address and command port number which are set in the projector from the on-screen menu or from the detail settings screen of the Web Browser Control of Network Function . · The account name and password which are set in the projector will be the account name and password of the administrator which has been set in the Web Browser Control of Network Function or in user's authority . · The account name will be fixed depending on the projector model to connect. OK Connection with the projector will be made according to the input settings . 4 . Complete the connection of the projector The screen to select a method to create the LOGO data will be displayed after the settings from to are completed and the connection with the projector is established in . (Go to page 15) ­ 14 ­ Select a method to create the LOGO data After the connection between the computer and the projector is established, the following screen will appear . Select the method to create which is best suited for your purpose . Create New LOGO data Create the LOGO data with the Bitmap saved in your computer . (See page 16) Load LOGO data From Projector Create the LOGO data with the LOGO data registered in the projector . (See page 17) Note This function might be disabled depending on the connected projector or method of connection . Open LOGO data Create the LOGO data with the LOGO data which was already created once and has been saved in your computer . CANCEL Return to the selection screen to connect . ­ 15 ­ Create New LOGO data "Open file" dialog box appears when you select "Create New LOGO data". (Go to page 18) Note · Only the BMP (Bitmap) file can be used for the LOGO data. · The pixel size of the Bitmap which can be used for the LOGO data varies depending on the projector being connected . · The number of colors which can be used for the LOGO data varies depending on the projector being connected . If the number of colors used is over the usable range, the color is automatically decreased in the software . If you still have the CD-ROM for this software that is supplied with your projector, refer to "List of Software Restrictions" in the application launcher of the CD-ROM. You can also find the latest information under "List of Software Restrictions" on our website: http://panasonic. net/avc/projector/ ­ 16 ­ Load LOGO data From Projector When you select the "Load LOGO data From Projector", the following screen appears . After you select the LOGO to load, click the "OK" button . Select the LOGO data of the Projector Specify the LOGO data to load . Note · If your projector has only one location to register the LOGO data, you do not need to select the LOGO . · Time to load the LOGO data will be different for different projectors . (Go to page 18) CANCEL Return to the screen to select a method to create the LOGO data . Open LOGO data If you select the "Open LOGO data", the "Open file" dialog box appears, and select the file you want to open ( . dat) . After the file is loaded, the main screen to create the LOGO data appears. [. . . ] Please refer to Connect with the projector (Page 8) for more details . Error code/Message Cause Solutions ERROR:2/This software does not support this model The projector being connected is not supported by this application . Is the selected file the LOGO data file which has been created by this software?ERROR:4/File size exceeded The Bitmap of the size which is not supported has been specified. [. . . ]