User manual PANASONIC KX-TG8051FX

[. . . ] TG8051_8061FX(e-e). book Page 1 Monday, April 25, 2011 11:42 AM Operating Instructions Digital Cordless Phone Model No. KX-TG8051FX KX-TG8061FX Digital Cordless Answering System Model No. Model shown is KX-TG8051. Before initial use, see "Getting Started" on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. You must subscribe to the appropriate service offered by your service provider/telephone company. To use this unit in your country, first change the unit's region setting to match your country (page 32). [. . . ] *15The recall/flash time depends on your telephone exchange or host PBX. *16The default setting will be as follows if you select the following regional codes when changing the unit's region setting (page 32): *17To prevent other users from joining your conversations with outside callers, turn this feature on. 29 TG8051_8061FX(e-e). book Page 30 Monday, April 25, 2011 11:42 AM Programming Special programming Alarm An alarm sounds at the set time for 3 minutes once or daily. Important: L Set the date and time beforehand (page 16). 1 2 1 (middle soft key) y72z {r}: Select the desired alarm option. Go to step 4. Using the phonebook's category feature (page 22), you can also select categories of callers whose calls override night mode and ring the handset (Caller ID subscribers only). L We recommend turning the base unit ringer off (page 27) in addition to turning the night mode on. (KX-TG8061) L If you have set the alarm, the alarm sounds even if the night mode is turned on. Turning night mode on/off 1 2 3 1 (middle soft key) y238 {r}: Select the desired setting. s M L You can select 24-hour or 12-hour clock format ("AM" or "PM") by pressing /. s M {ic} L When the night mode is set, f is displayed. 3 4 5 Enter the desired date and month. s M L We recommend selecting a different ringer tone from the one used for outside calls. M s {ic} L When the alarm is set, z is displayed. 4 5 Changing the start and end time 6 1 2 1 (middle soft key) y237 Continue from step 3, "Turning night mode on/off", page 30. Note: L To stop the alarm, press {ic} or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. Setting the ring delay This setting allows the handset to ring during night mode if the caller waits long enough. If you select "No Ringing", the handset never rings during night mode. s M s {ic} Night mode Night mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Night mode can be set for each handset. 30 TG8051_8061FX(e-e). book Page 31 Monday, April 25, 2011 11:42 AM Programming Note: L When the answering system answers the call, this feature does not work. (KX-TG8061) the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 35) with 7 after the call is disconnected. Selecting categories to bypass night mode 1 2 1 (middle soft key) y241 {r}: Select your desired categories. s t L "Q" is displayed next to the selected category numbers. M s {ic} Storing unwanted callers You can store up to 30 phone numbers in the call barred list. Important: L You must store the phone number with an area code in the call barred list. From the caller list: 1 {3} (y) 2 {r}: Select the entry to be barred. s MsI 3 {r}: "Caller Barred" s M 4 {r}: "Yes" s M s {ic} By entering phone numbers: 1 1 (middle soft key) y217 s m 2 Enter the phone number (24 digits max. ). [. . . ] L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. L Depending on your service provider/telephone company, the unit may display the caller's information at the 2nd ring or later. L Incorrect time information from incoming Caller ID changes the time. L Edit the phonebook entry name to fit in 1 line of text (page 23). Caller information is slow to display. [. . . ]