User manual PANASONIC KX-TG8051E

[. . . ] TG8051_8061E(e). book Page 1 Monday, January 24, 2011 4:37 PM Operating Instructions Digital Cordless Phone Model No. KX-TG8051E KX-TG8061E KX-TG8062E KX-TG8063E Digital Cordless Answering System Model No. Model shown is KX-TG8051. Before initial use, see "Getting Started" on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. You must subscribe to the appropriate service offered by your service provider/telephone company. Please access our online customer survey: http://panasonic. net/pcc/tel/q TG8051_8061E(e). book Page 2 Monday, January 24, 2011 4:37 PM Table of Contents Introduction Model composition. [. . . ] *11Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones. Helpline Tel. 0844 844 3898 Ireland 01289 8333 27 TG8051_8061E(e). book Page 28 Monday, January 24, 2011 4:37 PM Programming *12If you subscribe to a Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *13The recall/flash time depends on your telephone exchange or host PBX. *14To prevent other users from joining your conversations with outside callers, turn this feature on. Special programming Alarm An alarm sounds at the set time for 3 minutes once or daily. Important: L Set the date and time beforehand (page 16). Night mode Night mode allows you to select a period of time during which the handset will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Using the phonebook's category feature (page 21), you can also select categories of callers whose calls override night mode and ring the handset (Caller ID subscribers only). L We recommend turning the base unit ringer off (page 26) in addition to turning the night mode on. (KX-TG8061/KX-TG8062/ KX-TG8063) L If you have set the alarm, the alarm sounds even if the night mode is turned on. 1 2 1 (middle soft key) (72) {r}: Select the desired alarm option. Go to step 4. Turning night mode on/off 3 4 5 Enter the desired date and month. s M L We recommend selecting a different ringer tone from the one used for outside calls. M s {ic} L When the alarm is set, z is displayed. 1 2 3 1 (middle soft key) (238 {r}: Select the desired setting. s M L You can select 24-hour or 12-hour clock format ("AM" or "PM") by pressing /. s M {ic} L When the night mode is set, f is displayed. 6 4 5 Note: L To stop the alarm, press {ic} or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. Changing the start and end time 1 1 (middle soft key) (237 28 Helpline Tel. 0844 844 3898 Ireland 01289 8333 TG8051_8061E(e). book Page 29 Monday, January 24, 2011 4:37 PM Programming 2 Continue from step 3, "Turning night mode on/off", page 28. 4 5 {r}: Select the desired setting. s M 2 times {ic} Setting the ring delay This setting allows the handset to ring during night mode if the caller waits long enough. If you select "No Ringing", the handset never rings during night mode. s M s {ic} Note: L When the answering system answers the call, this feature does not work. (KX-TG8061/KX-TG8062/KX-TG8063) Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. [. . . ] L If your own greeting message is not recorded properly, callers are unable to leave a message. L If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit's number of rings setting or contact your service provider/telephone company (page 38). If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 37). [. . . ]