User manual PANASONIC KX-TG6612FX

[. . . ] TG661x_662xFX(e). book Page 1 Wednesday, March 2, 2011 2:31 PM Operating Instructions Digital Cordless Phone Model No. KX-TG6611FX KX-TG6612FX KX-TG6621FX Digital Cordless Answering System Model No. Model shown is KX-TG6611. Before initial use, see "Getting Started" on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. You must subscribe to the appropriate service offered by your service provider/telephone company. To use this unit in your country, first change the unit's region setting to match your country (page 29). [. . . ] L We recommend turning the base unit ringer off (page 25) in addition to turning the night mode on. (KX-TG6621) L If you have set the alarm, the alarm sounds even if the night mode is turned on. 1 2 8(72) {r}: Select the desired alarm option. s M L We recommend selecting a different ringer tone from the one used for outside calls. M s {ic} L When the alarm is set, E is displayed. Turning night mode on/off 1 2 3 8(238 {r}: Select the desired setting. s M L You can select 24-hour or 12-hour clock format ("AM" or "PM") by pressing /. s M 6 4 27 TG661x_662xFX(e). book Page 28 Wednesday, March 2, 2011 2:31 PM Programming 5 {ic} L When the night mode is set, 3 is displayed. Changing the start and end time 1 2 8(237 Continue from step 3, "Turning night mode on/off", page 27. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 32) with 7 after the call is disconnected. Setting the ring delay This setting allows the handset to ring during night mode if the caller waits long enough. If you select "No Ringing", the handset never rings during night mode. s M s {ic} Note: L When the answering system answers the call, this feature does not work. (KX-TG6621) Storing unwanted callers You can store up to 30 phone numbers in the call barred list. Important: L You must store the phone number with an area code in the call barred list. From the caller list: 1 {<} (y) 2 {r}: Select the entry to be barred. s I 3 {r}: "Caller Barred" s M 4 {r}: "Yes" s M s {ic} By entering phone numbers: 1 8(217 s m 2 Enter the phone number (24 digits max. ). s M L To erase a digit, press ^. Changing the handset name Each handset can be given a customised name ("Bob", "Kitchen", etc. ). You can also select whether or not the handset name is displayed in standby mode. If you select "Yes" without entering any handset name, "Handset 1" to "Handset 6" is displayed. 3 {ic} 1 2 3 4 5 8(1)4 Enter the desired name (max. s M 2 times {ic} Viewing/editing/erasing bar call numbers 1 2 3 8(217 {r}: Select the desired entry. s M s {ic} To erase a number: W s {r}: "Yes" s M s {ic} Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. Note: L When editing, press the desired dial key to add, ^ to erase. 28 TG661x_662xFX(e). book Page 29 Wednesday, March 2, 2011 2:31 PM Programming Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code. Changing the unit's region setting/Resetting the base unit 1 8(136 2 {r}: Select the desired country. s M 1 2 3 8(256 Enter the base unit PIN (default: "0000"). [. . . ] L If your unit is connected to any additional telephone equipment, remove and plug the unit directly into the wall jack. L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. L Depending on your service provider/telephone company, the unit may display the caller's information at the 2nd ring or later. L Incorrect time information from incoming Caller ID changes the time. [. . . ]