User manual PANASONIC HDC-Z10000

[. . . ] Operating Instructions High Definition Video Camera Model No. HDC-Z10000 Before use, please read these instructions completely. VQT3V06 Information for Your Safety Features This unit is a single body twin lens type 3D high-definition video camera. With the adoption of twin lens format, the convergence point can be adjusted within this unit, allowing to record natural and deep 3D video. (l 32) Indemnity about recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content, and does not guarantee any content if recording or editing does not work properly. Likewise, the above also applies in a case where any type of repair is made to the unit. About the recording format for recording motion pictures You can record motion pictures with AVCHD recording formats using this unit. [. . . ] The scene or still picture that is being played back or displayed can be deleted by pressing the button on the wireless remote control while playing back or displaying the thumbnail (one scene). Screen to select [ALL SCENES], [MULTI], or [SINGLE] is displayed when the button on the wireless remote control is pressed while displaying the thumbnail (20 scenes or 9 scenes). The scene or the still picture can be deleted by selecting the item and performing steps 2 to 3. Protecting scenes/still pictures Scenes/still pictures can be protected so that they are not deleted by mistake. (Even if you protect some scenes/still pictures, formatting the media will delete them. ) Change the mode to . 1 2 Select the menu. : [VIDEO SETUP] or [PHOTO SETUP] # [SCENE PROTECT] # [YES] MENU Touch the scene/still picture to be protected. When touched, the scene/still picture is selected and the indication appears on the thumbnail. Touch [Return] to complete the settings. - 80 - Playback Watching Video/Pictures on your TV Confirm the terminals on your TV and use a cable compatible with the terminals. A High quality 1 HDMI terminal 2 Component terminal 3 Video terminal Use the AV multi cable (supplied) or HDMI cable (optional) and check the output settings. If you connect this unit to a HDMI compatible high definition TV and then play back the recorded high definition images, you can enjoy them in high resolution with high quality sound. 1 Connect this unit to a TV. A HDMI cable (optional) Be sure to connect to the HDMI terminal. B AV multi cable (supplied) Picture quality 1 High definition images when connecting to HDMI terminal 2 High definition images when connecting to component terminal compatible with 1080i Standard images when connecting to component terminal compatible with 576i or 480i 3 Standard images when connecting to video terminal AV MULTI AV MULTI - 81 - Check that the plugs are inserted as far as they go. Please use "High Speed HDMI Cables" that have the HDMI logo (as shown on the cover). Part No. : RP-CHES15 (1. 5 m) Do not use any other AV multi cables except the supplied one. When connecting to the component terminal of the TV, the yellow plug of the AV multi cable is not required. When connecting to the AV terminal of the TV, do not connect the component terminal plug of the AV multi cable. Image may not display when the component terminal plug is connected simultaneously. 2 Select the video input on the TV. Example: Select the [HDMI] channel with a HDMI cable. (The name of the channel may differ depending on the connected TV. ) Check the input setting (input switch) and the audio input setting on the TV. (For more information, please read the operating instructions for the TV. ) 3 Change the mode to Cables to play back. Reference items Connecting with a HDMI cable (l 83) Listening in 5. 1 channel sound (l 83) Connecting with the AV multi cable (l 84) A HDMI cable (optional) B AV multi cable (supplied) If the HDMI cable and AV multi cable are connected at the same time, output will be prioritised in order of the HDMI cable, AV multi cable. This unit is not compatible with the VIERA Link. To display the on-screen information on the TV When the menu setting is changed, the information displayed on the screen (operation icon and Counter display etc. ) can be displayed/not displayed on the TV. MENU : [SW & DISP SETUP] # [VIDEO OUT OSD] # [ON] or [OFF] It can also be switched by the On-screen display button on the wireless remote control. Refer to the following support site for information about the Panasonic TVs that you can directly insert an SD card into the SD card slot on the TV and then play it back. Even if it is a scene recorded in 2D, it may not be able to play back depending on the recording format. For details on how to play back, please read the operating instructions for the TV. - 82 - Connecting with a HDMI cable Select the desired method of HDMI output. : [OTHER FUNCTION] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p (480p)]* * [576p] is displayed when [24p SELECT] is [OFF] and [480p] when it is [ON]. [AUTO] determines the output resolution automatically based on information from the connected TV. If the images are not output on the TV when the setting is [AUTO], switch to the method [1080p], [1080i] or [576p (480p)] which enables the images to be displayed on your TV. [. . . ] When cool wind from an air conditioner is directly blown onto this unit. When this unit is in a very humid place where the air is thick with steam. a heated swimming pool) Helpful hint If, for example, you have used this unit for recording on a ski slope and are taking it into a heated room, place the unit inside a plastic bag, remove as much of the air from inside the bag as possible, then seal the bag. Leave the unit for about an hour in the room so the temperature of the unit is close to the ambient temperature of the room, then use it. - 139 - Others About copyright Carefully observe copyright laws Recording of pre-recorded tapes or discs or other published or broadcast material for purposes other than your own private use may infringe copyright laws. [. . . ]