User manual PANASONIC HDC-SD90

[. . . ] Owner's Manual High Definition Video Camera Model No. HDC-SD90P/PC HDC-TM90P/PC Before connecting, operating or adjusting this product, please read the instructions completely. For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www. panasonic. com/contactinfo For Canadian assistance, please call: 1-800-561-5505 or visit us at www. panasonic. ca VQT3J56 Things You Should Know Thank you for choosing Panasonic!You have purchased one of the most sophisticated and reliable products on the market today. Used properly, we're sure it will bring you and your family years of enjoyment. The serial number is on the tag located on the underside of your camera. [. . . ] Operate the zoom lever to side and change over the thumbnail display to Highlight & Time frame index. (l 37) 1 Touch . To display the next (previous) page: j Slide the thumbnail display upward (downward) while touching it j Switch the Touch Menu, and then touch (up) / (down) on the thumbnail scroll lever 2 Touch the desired search condition. [3 SECONDS]/[6 SECONDS]/[12 SECONDS]/[MINUTES]/[FACE]*/[HIGHLIGHT]* * It is not displayed on iFrame scenes. When select [FACE], it will select the portion for which face recognition was performed from the scenes judged to be clearly recorded. A portion judged to be clearly recorded will be detected and displayed in thumbnail if you select [HIGHLIGHT]. 3 4 (When [MINUTES] is selected) Touch / to set the time. It can be set up to a maximum of 60 minutes. Touch [ENTER]. Touch the thumbnail to be played back. / . Next (previous) thumbnail can be displayed by touching Repeat playback Playback of the first scene starts after playback of the last scene finishes. MENU : [VIDEO SETUP] # [REPEAT PLAY] # [ON] The indication appears on the full screen views. (When playing back motion pictures by date, all the scenes on the selected date are played back repeatedly. ) 82 VQT3J56 Resuming the previous playback If playback of a scene was stopped halfway, the playback can be resumed from where it was stopped. MENU : [VIDEO SETUP] # [RESUME PLAY] # [ON] appears on the thumbnail view of the stopped If playback of a motion picture is stopped, scene. The memorized resume position is cleared if you turn off the unit or change the mode. (The setting of [RESUME PLAY] does not change. ) Zooming in on a still picture during playback (Playback zoom) You can zoom in by touching a still picture during playback. 1 Touch and hold the part you wish to zoom in on during still picture playback. It will display enlarged in order of normal display (k1) # k2 # k4. Touch and hold the screen to zoom in from the normal display k1 to k2. The still picture is zoomed in on, centering on the part you touched. 2 Move to the zoomed in position by touching /// or slide while touching the screen. A Displayed location of the zoom The location of the zoom displays for about 1 second when zooming in (zooming out) or moving the displayed location. The more picture is enlarged, the more its quality deteriorates. Zooming out from the zoomed still picture Touch Touch to zoom out. (k4 # k2 # k1) to return to normal playback (k1). You can also perform zoom operations using the zoom lever. 83 VQT3J56 Advanced (Playback) Various playback functions Playing back motion pictures/still pictures by date The scenes or the still pictures recorded on the same day can be played back in succession. 1 Touch the date select icon. (l 26) ALL A Date select icon 2 3 Touch the playback date. Touch the scene or the still picture to be played back. The scenes or the still pictures recorded on the date selected are displayed as thumbnails. Playing back of all the scenes or the still pictures returns if the unit is turned off or the mode is changed. Even if AVCHD scenes are recorded on the same day, they are grouped separately when the number of scenes exceeds 99. Even if AVCHD scenes or 1080/60p scenes are recorded on the same day, they are grouped separately whenever the AVCHD recording and 1080/60p recording are switched. Even if iFrame scenes are recorded on the same day, they are grouped separately in the following cases. j When the number of scenes exceeds 99 j When [NUMBER RESET] is performed Even if still pictures are recorded on the same day, they are grouped separately in the following cases. j When the number of still pictures exceeds 999 j When pictures are recorded in Hi-Speed Burst Shooting mode ( is indicated after the date in the list by date) j When [NUMBER RESET] is performed is displayed after the date in the list by date for the still pictures created from the motion picture. (l 81) 84 VQT3J56 Highlight Playback Part that was recognized as clearly recorded is extracted from a long recording, and it can be played back in a short time with effects and music added. Highlight playback cannot be used for iFrame scenes. 1 2 Touch . (l 26) ALL (Only when you would like to change the settings) Touch [SET] to select the item to change. [SCENE SETUP]: [PRIORITY SETUP]: [PLAYBACK TIME]: [EFFECT SETUP]: [MUSIC SELECT]: Select the scene or date to be played back. (l 87) 3 4 Touch [START]. When the [SCENE SETUP] is not changed in step 2, it will play back with the last recorded date. Select the playback operation. [. . . ] 1) B Terminal de entrada de CC 1 Conecte el adaptador de CA al terminal de entrada de CC. El indicador de estado parpadeará de color rojo en un intervalo de 2 segundos, indicando que comenzó la carga. Se apagará cuando se completa la carga. 164 VQT3J56 Encender/apagar el dispositivo Encender y apagar el dispositivo con el botón de alimentación Abra el monitor LCD y presione el botón de alimentación para encender la unidad. Selección del modo Utilice el selector de modo para cambiar el modo a , o . Modo de grabación de películas (l 30) Modo de grabación de fotografías (l 32) Modo de reproducción (l 36, 80) A El indicador de estado se ilumina. Para apagar la unidad, mantenga pulsado el botón de alimentación hasta que el indicador de estado se apague. [. . . ]