User manual PANASONIC ESSL33

[. . . ] This symbol is used to alert users to a specific operating procedure that must not be performed. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely. Close supervision is required when this appliance is used by, on, or near children or invalids. Use this appliance only for its intended use as described in this manual. [. . . ] - The battery fluid may cause blindness if it comes in contact with your eyes. - The battery fluid may cause inflammation or injury if it comes in contact with the skin or clothes. Doing so may damage the blades as they are very thin and deform easily. Do not leave the shaver exposed to direct sunlight with the foil frame detached. Doing so may deteriorate the waterproof rubber and degrade waterproof function, which may cause to malfunction. failure to do so may cause malfunction due to condensation or rust. If only one of the inner blades is inserted, the shaver may be damaged. If you clean the shaver with water, do not use salt water or hot water. Intended use This WET/DRY shaver can be used for wet shaving using shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean with water. Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic WET/DRY shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving. Power plug  Adaptor  Power cord  Appliance plug (Back)   B 4 Cleaning shutter 5 Finger rest 6 Power switch 7 Charge status lamp ( 8 Appliance socket 9 Water inlet  Outer foil section  System outer foil   release buttons  Inner blades ) A S C G Y T V 9 PB013084 - ES-SL33_ (01EN)_05-19-16. Indd 9 2016/5/19 17:34:07 Using the carrying holder The shaver can be kept vertically or horizontally. When transporting the shaver, you can use the carrying holder to protect the outer foil and prevent erroneous operation of the switch. When transporting the shaver, be sure to clean off any shavings before attaching the carrying holder. Attaching the carrying holder Attach the carrying holder as illustrated. Align the appliance plug ( ) with the appliance plug socket triangle mark ( ) and insert the appliance plug. 1 Removing the carrying holder Remove the carrying holder while pressing down on both sides. Charging the battery for more than 15 hour will not affect battery performance. The charge status lamp ( ) glows and stays on until the plug is disconnected from a household outlet. ) stays on in Using the shaver Charging complete The charge status lamp ( ) remains on in red after charging is completed. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. FCC Caution: To assure continued compliance, install and use in accordance with provided instructions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. [. . . ]