User manual PANASONIC ER-GC20

[. . . ] Before operating this unit, please read these instructions completely and save them for future use. Do not use the clipper if the power cord or the AC adaptor is worn, or if the AC adaptor does not fit snugly in the outlet. [. . . ] ⷠClean the housing only with a soft cloth slightly dampened with tap water or soapy tap water. ⷠDo not store the clipper where it will be exposed to direct sunlight or other heat sources. ⷠStore the AC adaptor in a dry area where it is protected from damage. ⷠDo not bend the power cord or wrap it around the clipper. A Main body 1 Sliding plate for maintenance 2 Power switch [0/1] 3 Water drain hole B Blade block 4 Cleaning lever 5 Moving blade 6 Stationary blade 7 Mounting hook Note Power will not turn on while the sliding plate for maintenance is open. While pressing on the trimming height adjustment button, slide the comb attachment until it comes off the main body. Trimmingwithoutacombattachment Trimming your hair without a comb attachment will trim hair length to approx. Raise the tip of the comb attachment little by little from the hairline. If you cannot remove all the hair trimmings, clean with the sliding plate for maintenance opened and blades removed. note · Power will not turn on while the sliding plate for maintenance is open. ⷠIf the power switch is turned on, the sliding plate for maintenance cannot be opened. Be sure to set the switch to "0" before you remove the blade. [. . . ] informationonDisposalinotherCountriesoutsidethe EuropeanUnion This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. [. . . ]