User manual PALSON IRIS

[. . . ] If you touch hot metal parts, water, or steam, burns could be suffered. Be careful when placing the plate upside down as there could be hot water in the tank. All repair work shall be carried out by an Authorized Technical Service. [. . . ] If you are unsure of a garment's fiber content, test a small area (in an inside seam or hem) before ironing the entire garment. If wrinkles are not removed, increase the temperature gradually until you find the setting that provides the best results without damaging the fabric. Do not pass the "MAX" line of the tank so it will not overflow. The automatic shutoff safety function will turn off the iron after 30 seconds if it is not moved in a horizontal position or rather 8 minutes if it is not moved when in a vertical position. Upon activating the automatic shutoff function, the blue light starts to blink. Wait for the heat light to turn on and it shuts off, meaning the iron has reached the appropriate temperature. If the blue light stops blinking and the heat light does not shut off, the iron has already reached the suitable temperature. Be sure the iron is not plugged into the outlet before filling it with water. Be careful to never fill it above the water tank <<MAX>> line. Adjust the steam position temperature switch ( In this setting, the iron can be used as a steam iron when the heat light is turned off. The light will turn on and off periodically during ironing depending on whether the temperature switch functions correctly. There are a total of 7 positions that allow for steam to be adjusted easily. Put the iron in a vertical position on the rest heel to reorganize the clothing or while it is not being used. It may be necessary to press the button several times after filling in order to activate it. The extra steam function can be used only when ironing at higher temperatures (from · Vertical iron use: The extra steam function can also be used when the iron is in a vertical position with the goal of removing wrinkles from hanging clothes, curtains, etc. SPRAYER BUTTON USE Whenever there is enough water in the tank, the sprayer button can be used at any ironing temperature switch with steam or dry. Using the self-cleaning function is important the first time the iron is used and afterwards at least once a month with the goal of eliminating fouling, etc. Let the iron heat up until the pilot light (7) turns off and turns on again (several times). [. . . ] The water and minerals it contains vary a great deal according to their geographic location. If you live in an area with hard water, we recommend using distilled water which can be easily attained in retail stores. rub the bottom with a damp towel and a non-abrasive cleaning product. [. . . ]