User manual PALSON GEISER

[. . . ] Do not aim the nozzle towards yourself or other people or animals when you use the washer. Do not use the pressure washer without having fully read the instruction manual. sAFETY INSTRUCTIONS WHEN YOU USE THE PRESSURE WASHER ALWAYS OBSERVE THE ATTACHED DETAILED SAFETY INSTRUCTIONS. [. . . ] This water pressure washer can work in an effective manner with water temperatures from 5º - 50ºC. APPLICATIONS Main applications for this device are domestic cleaning tasks such as: - Cars, motorcycles, caravans, boats and bikes. DESCRIPTION Your pressure water washer has been designed for outside use and only for cleaning stone, pottery, stoneware, glass, metal and plastic materials. Before assembly / disassembly of the product, make sure it is unplugged from the outlet. WAND ASSEMBLY (DIAGRAM A) Connect the wand and the pistol (6 and 7) by pushing the bayonet into the nozzle (6) towards the cap of the pistol (7) and mounting it in position (turning it clockwise until its position is blocked). Always remove or replace parts while the pressure water washer is disconnected and unplugged from outlet power. wATER OUTLET CONNECTION (DIAGRAM B) Screw the high pressure hose (5) in the water outlet (4). Be sure the connector is firmly affixed (but not tightened excessively). the minimum supply hose length (not included) advised for maximum user comfort is 5 meters with a 12. 5 (1/2") mm diameter to prevent delay pressure and any potential damage associated with the pressure water washer. Fully open the water faucet, do not activate the pressure water washer yet. Never begin the pressure water washer's operation without supplying connected water. Keep the pistol trigger tightened (7) until all the water pressure air and water begin to flow. As soon as the water begins to flow out from the nozzle continually, release the trigger. Never try to open the pressure water cleaner's cover during operation. CONNECTION AND DISCONNECTION In order to activate the pressure water cleaner, select "I" in the on/off switch. In order to deactivate the pressure water washer, select "0" in the on/off switch. In a dangerous setting, the pertinent safety standards must be observed to set the water washer in operation. [. . . ] TROUBLESHOOTING If you have a problem, first check the following table. If the methods indicated cannot solve the problem, bring the water washer, packaging, and stamped warranty to the retail store or Authorized Technical Service to get help. CORRECTION Connect the outlet Try another outlet Replace the extension cord Check that the power supply voltage matches the machine's specifications. [. . . ]