User manual PALSON CANADA

[. . . ] - The appliance must not be adjusted, dismantled or repaired by people who are not qualified to do so!- Keep the coolbox away from moisture and do not clean it with water, as to do so could cause electric shock or short circuiting. Do not pull on the cable to unplug the appliance from the mains power supply. [. . . ] Children must be supervised to ensure that they do not play with the appliance. Best results will be obtained when it is filled with food and drink which is already cold. It will take some hours to cool food and drink that is at room temperature. The appliance is also designed to keep food warm, although not to heat cold food. Nevertheless, if you leave the food for long enough it will eventually start to warm up. The food will remain warm for quite a while even after disconnecting the appliance from the power supply. Put the power switch into the `0' position before connecting the cable to the power socket. The appliance can be connected to more than one power source but not at the same time. Do not use any other method of connecting the unit to the AC power supply. Connect one end of the AC power cable to the AC power socket on the coolbox and connect the other end to the mains power supply at home or at the campsite. 12V Power supply: (DC) Connect one end of the DC power cable to the DC power socket and the other end to the cigarette lighter socket inside the car or boat. How to use the AC/DC power selector switch Select AC or DC according to the power source. If you put the switch in the `0' position the appliance is switched off completely, even if one of the cables remains connected to the power supply or you have selected COLD or HOT. How to use the HOT/COLD switch Once you have decided between AC or DC current you need only move the switch to the position you require: COLD to put the unit into cooling mode and HOT to keep food hot. When you select COLD a green LED will light up to indicate that it is operating. Do not switch directly from COLD to HOT mode or from HOT to COLD mode. Instead, keep the selector switch in the `0' position for 5 minutes before changing the operating mode. - To avoid electrical hazards, do not wet or splash the surface of the appliance while it is on. [. . . ] The cooling function does Faulty contact between the plug Plug firmly into the cool/hotbox socket and the wall not work. The appliance is too close to a Move the appliance away from the wall or other wall or object. In order to prevent a failure, turn off the cool/hotbox immediately and unplug from the mains socket. [. . . ]