User manual PALM ZIRE 71

[. . . ] Handbook for the PalmTM ZireTM 71 Handheld Copyright © 1998­2003 Palm, Inc. Graffiti, HotSync, the Palm logo, and Palm OS are registered trademarks, and Palm, Palm Powered, VersaMail, and Zire are trademarks of Palm, Inc. All other brands are trademarks or registered trademarks of their respective owners. Disclaimer and Limitation of Liability Palm, Inc. assumes no responsibility for any damage or loss resulting from the use of this handbook. [. . . ] You can select from the following options: 640 x 480 (high), 320 x 240 (medium), and 160 x 120 (low). Determines whether you need to approve each photo before taking another photo. The Off setting enables you to quickly take photos without approving the previous photo. Indicates whether photos will be saved on your handheld or on an expansion card seated in the expansion slot. Specifies the prefix that appears in front of the automatically assigned photo name. The Default setting assigns set followed by the session and photo number. The Custom setting enables you to replace set and the session number with the text you specify. The default setting is On. Review Photo Before Saving Save To Date Stamp Auto Name Format Shutter Sound 130 Using the camera Advanced Opens the Advanced Controls dialog box where you can preview and select the following settings: White balance. Changes the exposure settings based on the lighting conditions. You can select from the following options: Automatic, Fluorescent, Indoors, and Sunlight. Adjusts the ratio between light and dark colors. Contrast. Auto brightness. When the slider is visible, you can adjust the brightness of camera images without affecting your other handheld screens. 5. Enter the name you want to use as a prefix for the photos in the current session. Tap OK. 131 Chapter 12 Using PalmTM Photos Taking photos Each time you open the camera and take photos, you initiate a new photo session. When you close the camera, you end the current photo session. To take photos: 1. Position your handheld so that the photo you want to photograph appears in the viewfinder on the handheld screen. If you see thumbnail images instead of the image you want to photograph, tap the Viewfinder button. Viewfinder button 3. Press the shutter button to take the photo. If you enabled the Review photo before saving option, the photo appears on your handheld screen for a brief period. If you are not satisfied with the photo, tap the trash button to delete the photo. If you do not delete the photo, it is 132 Using the camera automatically saved in JPEG format in the designated location (your handheld or an expansion card) and the viewfinder reappears. 4. Repeat steps 1 through 4 to take more photos. Managing memory space for photos The viewfinder displays the number of photos you have room to store in the selected location. The selected location is based on the Save to setting in the Options dialog box. If you fill the available memory, an Out of memory screen appears, where you can select photos to delete or access the Options screen to select a lower resolution setting for new photos. Alternatively you can close the camera and move photos between your handheld and an expansion card (sold separately) and you can change the destination for new photos to your handheld or an expansion card based on available space. To make room for more photos: 1. From the Out of memory screen, tap the Thumbnail button. Trash button Thumbnail button 2. Tap Done. You can also tap Options to select a lower resolution setting for any photos you take during the rest of the current session. 133 Chapter 12 Using PalmTM Photos Approving photos You can review the photos you took during the current session and delete any unwanted photos prior to ending the session. To approve photos taken in the current session: 1. After taking a series of photos, tap the Thumbnail button. Thumbnail button 2. Tap any photo you want to view. TIP You can also select a photo with the 5-way navigator. [. . . ] Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. Advarsel! Lithiumbatteri--Eksplosionsfare ved fejlagtig håndtering. Levér det brugte batteri tilbage tilleverandøren. Varoitus Paristo voi räjähtää, jos se on virheellisesti asennettu. Hävitä käytetty paristo valmistajan ohjeiden mukaisesti. Advarsel Eksplosjonsfare ved feilaktig skifte av batteri. [. . . ]