User manual PALM TUNGSTENT GETTING STARTED GUIDE

[. . . ] Connect the adapter to the cradle and plug it into an electric outlet. (Note: Your adapter may connect to the cradle cable, not to the cradle itself. ) Users of Windows 95 and NT: You cannot use a USB port. You must use a cradle (not included) that has a serial-port connection. Mac: In the Palm folder, double-click the Palm Desktop icon (shown below). * If your handheld did not turn on, see "Troubleshooting turning on the handheld" on the other side of this document. 7 Enter an appointment in the handheld. [. . . ] The HotSync logo, Palm, the Palm logo, and Tungsten are trademarks of Palm, Inc. Other product and brand names may be trademarks or registered trademarks of their respective owners. Navigator: special features Use Quick Look Up in Address Book In Address List view, press Right to display letter boxes. With the handheld off, press Select. Disclaimer and Limitation of Liability Palm, Inc. assumes no responsibility for any damage or loss resulting from the use of this guide. assumes no responsibility for any loss or claims by third parties which may arise through the use of this software. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or repairs. Be sure to make backup copies of all important data on other media to protect against data loss. Use Quick Connect to initiate SMS messages; dial numbers with a compatible mobile phone (not included) See the note attached to the highlighted Date Book event Check off a completed To Do List item Control the volume while listening to a Voice Memo Display the time for two seconds Software Download Available PalmTM Desktop software is supplied on a CD-ROM disc. Check www. palm. com for updates and new versions of the software. Read This First SOLUTIONS FROM Agency Compliance Information Product regulatory and compliance information can be found in the Handbook file located on the product CD-ROM. P/N: 406-4530B-US Troubleshooting charging the handheld (step 3) Problem: The indicator light does not go on. Try the following: · Make sure your handheld is well seated in the cradle. · Make sure the power adapter is properly connected to the cradle. · Make sure the power adapter is plugged into a working electric outlet. Troubleshooting installation (step 5) Windows users, if the Palm Desktop Installer does not appear automatically on your computer screen when you insert the CD-ROM into the drive, do the following: 1. Locate the drive into which you inserted the Palm Desktop software CD-ROM (your CD-ROM or DVD drive). users, if the CD-ROM folder does not automatically open to display the Palm Desktop Installer icon, find the CD-ROM icon on your Mac desktop and double-click it to open it. Troubleshooting HotSync operations (steps 5 and 8) Problem: HotSync operation does not begin. Check for the following: · Make sure your handheld is well seated in the cradle. · Make sure the cradle is connected to a working USB port of your desktop computer. Windows: After you install Palm Desktop software, try the following: · Check the Windows system tray, in the lower-right corner of your computer screen, and make sure the HotSync icon appears there. If it is there, then HotSync Manager is running. HotSync icon Problem: On Windows, Palm Desktop Installer does not automatically appear. Troubleshooting turning on the handheld (step 4) Problem: Handheld does not turn on. If your handheld has been charged for at least two hours and it seems not to turn on when you press the power button, try the following: · Press the Date Book application button, or any other application button, to ensure your handheld is turned on. [. . . ] · If you are using a USB cradle, disconnect the cradle from your computer, and then reconnect the cradle and restart your computer. · If you are using the optional serial cradle, double-click the HotSync Manager icon in the Palm folder, and then click the Connection Settings tab. Make sure PalmConnect is selected and that the port selection matches the port to which the HotSync cradle is connected. Reset button Troubleshooting third-party applications Palm works with developers of third-party add-on applications to ensure the compatibility of these applications with your new Palm handheld. Some third-party applications, however, may not have been upgraded to be compatible with your new Palm handheld. [. . . ]