User manual PALM GPS 3263 GETTING STARTED GUIDE

[. . . ] Make sure your device's Bluetooth functionality is turned on: Palm OS devices Go to Applications and select Bluetooth . Insert the TomTom NAVIGATOR expansion card included in this package into your device's expansion card slot. If you selected Automatic, tap Activate and then enter the 15-character product code written on the TomTom NAVIGATOR DVD sleeve. Enter the 15-character product code written on the label on the TomTom NAVIGATOR DVD sleeve, and then enter the device code displayed on your device screen. [. . . ] Connections can happen only between your device and a Bluetooth device that has the same passkey. You should need to enter the passkey only the first time you establish a Bluetooth connection between your device and the receiver. My device does not seem like it successfully connected to the receiver after setup. If the setup process does not seem to work, try manually creating a partnership between your device and the receiver. Select the GPS receiver from the device list, and then press Next action key). Enter the four-digit passkey 0000 (four zeroes) on your device, and then press Finish (right action key). Should I keep my device and the receiver connected to the vehicle power adapter while they are in use?If your device is fully charged, it can run for about four to five hours in the car. For longer trips, it is a good idea to keep the vehicle power adapter connected to keep both your device and the receiver charged. This prevents the batteries from getting too low for the Bluetooth connection to function. See the TomTom Quick Start Guide included in this package for detailed information about NAVIGATOR features. If you still need help, refer to the support section of the TomTom website at www. If you have problems with the Bluetooth GPS receiver hardware, refer to the Palm website at www. Please read the following information to ensure safe use of the GPS Navigator. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, which is responsible for its availability and accuracy. Any changes in GPS availability and accuracy may impact the operation of your GPS receiver. And Palm cannot accept any liability for the availability and accuracy of GPS. Use of a GPS receiver for navigation does not by any means substitute for the need to drive with due care and attention. Do not mount the GPS Navigator where the driver's field of vision is obscured or where airbags may deploy, and do not place it on the dashboard without securing it reliably. Do not mount the unit or route the cables in such a way as to interfere with control of the vehicle. Failure to follow these guidelines could result in an accident or collision resulting in serious injury or death. Drive safely using information from street signs and landmarks in addition to the GPS Navigator. [. . . ] While you should always take appropriate precautions to discharge static electricity, if you are in an environment where you notice ESD events you may want to take extra precautions to protect your electronic equipment against ESD. All other brand and product names are or may be trademarks of, and are used to identify products or services of, their respective owners. Assumes no responsibility for any damage or loss resulting from the use of this guide. Assumes no responsibility for any loss or claims by third parties which may arise through the use of this device and any accompanying or associated software provided by Palm, Inc. [. . . ]