User manual OUTBACK POWER SYSTEMS SRC-BC3 SCHEMA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OUTBACK POWER SYSTEMS SRC-BC3. We hope that this OUTBACK POWER SYSTEMS SRC-BC3 user guide will be useful to you.
 |
OUTBACK POWER SYSTEMS SRC-BC3 SCHEMA: Download the complete user guide (344 Ko) |
Manual abstract: user guide OUTBACK POWER SYSTEMS SRC-BC3SCHEMA
Detailed instructions for use are in the User's Guide.
[. . . ] Battery Enclosure Cabling Kit SRC-BC3
For a 48-volt Battery Bank
CAUTION: Equipment Damage
See the SmartRE Installation Manual for detailed information on installing the battery cables, including torque requirements. [. . . ] Includes the following cables:
2a
BAT (+)
3/8" Lug
20" 1
3/8" Lug
20" Black #1/0 AWG (x1) with 3/8" lugs on both ends
NOTE: 1. Eye-to-Eye
10
7a
WARNING: Shock Hazard
Ensure the Inverter Charger Breaker is in OFF position BEFORE making connections. 30"
3/8" Lug 3/8" Lug
2a
2 3 4 5 6
2b
3/8" Lug 3/8" Lug 3/8" Lug 3/8" Lug 3/8" Lug
GRID AC IN
GEN AC IN
INVERTER AC OUT
INVERTER BYPASS
AC LOAD #1
AC LOAD #2
GROUND FAULT
CHARGE CONTROL
DC LOAD
SOLAR INPUT
INVERTER CHARGER
3/8" Lug
Battery Enclosures (x2)
(Batteries shown wired in "Series/Parallel")
30" Black #1/0 AWG (x5) with 3/8" lugs on both ends
3/8" Lug 3/8" Lug
2. No hardware for securing the cable to the battery is provided with this kit. Hardware (nuts, bolts, and washers) for securing the cable to the battery should comply with the specifications from the battery manufacturer.
10
5/16" Lug
7a
7
7b
3/8" Lug
Connecting Cables:
1. 2b 7b
11 7
65"
3/8" Lug 3/8" Lug
30" Red #1/0 AWG (x1) with one 5/16" lug* and one 3/8" lug
*attaches to DC Breaker
8 9
3/8" Lug 3/8" Lug
65" Black #1/0 AWG (x2) with 3/8" lugs on both ends
6 Vdc
6 Vdc
6 Vdc
1
6 Vdc
7a
Hardware Order on the DC Breaker:
Bolt Flat Washer
2a
Hardware Order on the Shunt:
3 4
OFF
Nut
Lock Washer Flat Washer
7. [. . . ] Do not use in a Positive Ground installation.
Main Office 19009 62nd Avenue NE Arlington, WA USA 1. 360. 435. 6030
900-0105-01-00 Rev A © March 2010 OutBack Power Systems. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OUTBACK POWER SYSTEMS SRC-BC3
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OUTBACK POWER SYSTEMS SRC-BC3 will begin.