User manual OUTBACK POWER SYSTEMS SRC-BC2 SCHEMA

[. . . ] Battery Enclosure Cabling Kit ­ SRC-BC2 For a 48-volt Battery Bank CAUTION: Equipment Damage See the SmartRE Installation Manual for detailed information on installing the battery cables, including torque requirements. [. . . ] No hardware for securing the cable to the battery is provided with this kit. Hardware (nuts, bolts, and washers) for securing the cable to the battery should comply with the specifications from the battery manufacturer. *attaches to DC Breaker 10a WARNING: Shock Hazard Ensure the Inverter Charger Breaker is in OFF position BEFORE making connections. 3/8" Lug 3/8" Lug 3/8" Lug 3/8" Lug 3 4 5 6 3/8" Lug 3/8" Lug 3/8" Lug 3/8" Lug 30" Black #1/0 AWG (x4) with 3/8" lugs on both ends Battery Enclosures (x2) (Batteries shown wired in "Series/Parallel") 3/8" Lug 52" 7a 7 65" 7b 3/8" Lug Connecting Cables: 1. 1 52" Black #1/0 AWG (x1) with 3/8" lugs on both ends 11 7 10 12 2 3/8" Lug 3/8" Lug 8 9 3/8" Lug 3/8" Lug 65" Red #1/0 AWG (x1) with 3/8" lugs on both ends 65" Black #1/0 AWG (x1) with 3/8" lugs on both ends 2. 6 94" 5/16" Lug 10a 10 10b 3/8" Lug 94" Red #1/0 AWG (x1) with one 5/16" lug* and one 3/8" lug . 12 Vdc 12 Vdc 12 Vdc 12 Vdc 10a Hardware Order on 4. the DC Breaker: Bolt 7a Hardware Order on the Shunt: 7. Then connect 7b . 3 4 5 6 OFF Flat Washer Nut Lock Washer Flat Washer DC Breaker Locking Washer BAT (­) from CC BAT (­) with 3/8" lug 7b 12 Vdc 12 Vdc 10b 12 Vdc 12 Vdc BAT (+) with 5/16" lug SHUNT IMPORTANT: All configurations must comply with local and national electric codes. [. . . ] Do not use in a Positive Ground installation. Main Office 19009 62nd Avenue NE Arlington, WA USA 1. 360. 435. 6030 900-0104-01-00 Rev A © March 2010 OutBack Power Systems. [. . . ]