User manual OUTBACK POWER SYSTEMS SRC-BC1 SCHEMA

[. . . ] Battery Enclosure Cabling Kit ­ SRE-BC1 For a 48-volt Battery Bank Electronics Enclosure CAUTION: Equipment Damage See the SmartRE Installation Manual for detailed information on installing the battery cables, including torque requirements. [. . . ] Includes the following cables: 4a 3/8" Lug 6 20" 1 3/8" Lug 20" Black #1/0 AWG with 3/8" lugs on both ends. (x1) WARNING: Shock Hazard Ensure the Inverter Charger Breaker is in OFF position BEFORE making connections. 30" 3/8" Lug 3/8" Lug 2 3 40" 4 4 5 3/8" Lug 30" Black #1/0 AWG with 3/8" lugs on both ends (x2) 3/8" Lug IMPORTANT: This installation requires the Electronics Enclosure to be stacked on top of the Battery Enclosure. 6 5/16" Lug 3/8" Lug 4a 5a 4b 5b 3/8" Lug 3/8" Lug 40" Red #1/0 AWG with one 5/16" lug and one 3/8" lug (x1) 40" Black #1/0 AWG with 3/8" lugs on both ends (x1) Connecting Cables: 1. No hardware for securing the cable to the battery is provided with this kit. Hardware (nuts, bolts, and washers) for securing the cable to the battery should comply with the specifications from the battery manufacturer. . 2. Connect 1 2 3 12 Vdc 12 Vdc . 4a Hardware Order on the DC Breaker: Bolt Flat Washer 5a Hardware Order on the Shunt: 5. Then connect 5b . 3 2 OFF Nut Lock Washer Flat Washer DC Breaker Locking Washer BAT (­) from CC BAT (­) with 3/8" lug 1 12 Vdc 12 Vdc BAT (+) with 5/16" lug SHUNT IMPORTANT: Grounding IMPORTANT: All configurations must comply with local and national electric codes. [. . . ] Do not use in a Positive Ground installation. Main Office 19009 62nd Avenue NE Arlington, WA USA 1. 360. 435. 6030 900-0103-01-00 Rev A © March 2010 OutBack Power Systems. [. . . ]