User manual OSTER FPSTFP4600

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OSTER FPSTFP4600. We hope that this OSTER FPSTFP4600 user guide will be useful to you.


OSTER FPSTFP4600 : Download the complete user guide (1024 Ko)

Manual abstract: user guide OSTER FPSTFP4600

Detailed instructions for use are in the User's Guide.

[. . . ] To reduce the risk of injury to persons, never place cutting blade on motor base without first putting container properly in place. Be certain container cover is securely locked in place while operating appliance. The small pusher should only be used in combination with the large pusher. To reduce the risk of electric shock, as a safety feature, this plug will fit in a polarized outlet only one way. [. . . ] 7 Press the ON button for continuous processing or the PULSE button for short processing tasks. When using the PULSE setting, hold down the PULSE button for about 2­3 seconds at a time, check results and repeat if desired. 8 When finished processing, press the OFF button and allow the chopping blade to stop rotating. 10 Hold the disc stem with multi purpose blade attached by its stem and remove. Unlock the bowl by turning it counter- clockwise towards the UNLOCK mark, and lift off. NOTE: The 10 Cup Food Processor comes with a spatula to easily empty contents inside the bowl. Do not use the processor continuously for more than 3 minutes at a time. Dough Blade: Use the dough blade for kneading bread dough and for mixing batters and cake mixtures. (See "How to assemble the bowl") 2 Take the disc stem and slide it onto the center post. Then grasp the dough blade by its stem and slide over the disc stem (Figure 5). (See "How to Lock the cover") 5 Place the food pusher into the feed tube. When using the PULSE setting, hold down the PULSE button for about 2-3 seconds at a time, check results and repeat if desired. NOTE: All liquid ingredients should be added through the food chute while unit is processing. It is important to add enough liquid to make the dough soft enough to knead. 8 When finished processing, press the OFF button and allow the dough blade to stop rotating. 10 Hold the disc stem with dough blade attached by its stem and remove. Unlock the bowl by turning it counter- clockwise towards the UNLOCK mark, and lift off. NOTE: The 10 Cup Food Processor comes with a spatula to easily empty contents inside the bowl. Do not use the processor continuously for more than 3 minutes at a time. (See "How to assemble the bowl") 2 Slide the Disc Stem onto the center post of the base. With the desired side facing up (slicing or shredding), push the slice/ shred disc onto the disc stem (Figure 6). 5 Put ingredients in the feed tube and press the food pusher lightly onto the ingredients (Figure 7). [. . . ] Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. jCS disclaims all other warranties , conditions or representations , express , implied , statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OSTER FPSTFP4600




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OSTER FPSTFP4600 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.