User manual OREGON SCIENTIFIC WS902

[. . . ] Press + or - to change the settings or press and hold + / ­ to rapidly change the settings. RADIO To activate / deactivate radio: · Press RADIO to turn radio on / off. Press and hold press RADIO TUNE to auto search or ALARM To set the alarm: 1. [. . . ] DISPLAY BRIGHTNESS HIGH·LOW: Select LCD display brightness HIGH / LOW 4. AUDIO LINE-IN: Socket for connecting to external music storage device 5. / : Adjust brightness (only when LAMP function has been activated) NATURE SOUND: Toggle through selection (Forest Birds / Brook / Ocean / Rain) SET CLOCK: Enter clock settings SET ALARM: View alarm status; enter alarm settings LAMP: Turn on/off light + / -: Adjust volume (only when radio / soothing sound is playing); change values of the setting SLEEP: View remaining time; enable radio / soothing sound / light sleep; set sleep timer 10. Beep / selected Alarm with wake up light enabled Batteries low / no battery Alarm time Radio Mode is ON and frequency is displayed Volume is displayed Sleep mode is ON and remaining time is displayed Nature sound selected (1-4) Sound from external source plugged into unit GETTING STARTED REPLACING LAMP For first time use, take out provided light bulb and go directly to step 4. Unplug unit from wall socket and allow unit (bulb) to cool for approx. CAUTION Always allow unit to cool for 15 minutes prior to cleaning, storing, replacing parts as unit can be very hot. Lift cover off. RADIO TUNE : Enable auto-search for radio station; adjust radio frequency marginally (by 0. 05MHz) 10. ALARM: Enable / disable alarm function RADIO TUNE to manually select frequency. SOOTHING NATURE SOUNDS NOTE Deactivate radio first. To activate / deactivate soothing sounds: · Press LAMP located at the bottom left of LCD display. · · · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. To adjust level of brightness: · Press / to increase or decrease brightness. / to rapidly change level of · Consult the dealer or an experienced radio / TV technician for help. DECLARATION OF CONFORMITY The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www. oregonscientific. com), or on the warranty card for this product) for all inquiries instead. TIP Press and hold brightness (1-20). · · · For your convenience, the level of brightness will be stored in memory for the next time light is turned on. PLAY MUSIC Using a cable, plug one end to your music storage device and one end to AUDIO LINE-IN located at the back of unit. When device has been successfully connected, will be displayed on the LCD screen and sound will emit from speakers. [. . . ] NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]