User manual OREGON SCIENTIFIC WRS368

[. . . ] Music Sphere Wireless Remote Speaker System Model: WRS368 User Manual WRS368 Eng (US) Cover R18 OP 1 7/30/05, 10:51 AM IMPORTANT SAFETY INSTRUCTIONS The Music Sphere Wireless Remote Speaker System is designed to give you years of service if handled properly. Ensure that you heed all warnings to minimize product malfunction and reduce the chances of incurring personal injury. Before using the unit, observe the following guidelines to ensure proper care and maintenance. ACCESSORIES Take care when placing the product on an unstable cart, stand, tripod, bracket or table. Quick stops, excessive force and uneven surfaces may cause the system to overturn and fall, causing serious injury to a child or adult, and serious damage to the product. [. . . ] The volume bar, speaker icon, clock, reception status icon and audio source number all appear on the LCD. The LCD backlight also turns on. NOTE In a non-controlled environment, many factors can affect battery life, such as volume, LCD backlight and temperature. When the batteries are not used for a long period of time, remove them to save battery power. NOTE When the batteries are becoming low on power , appears on the right side of the LCD and the LCD backlight dims. NOTE Do not use different types of batteries together or mix new batteries with old ones. When any of the batteries are depleted, replace all batteries with new ones. INSTALLING THE WALL MOUNT UNIT (OPTIONAL) The Wireless Remote Speaker is equipped with rubber supports to give your unit a stable base while placed on any a flat surface. If the Wireless Remote Speaker is receiving a signal is displayed on the LCD. If the from the Transmitter, icon does not appear, power off the unit and then turn it appears full. Make sure NOTE If appears on the LCD, the reception signal is interrupted or the speaker is out of range of the Transmitter. The audio source number will not show on the display and the LCD backlight turns off. To power off your Wireless Remote Speaker, press button again (the clock remains on even the when the speaker is turned off). NOTE The Wireless Remote Speaker should be turned off even if the power at the audio source has been turned off. TIP When left unused for a long period of time, the unit should be unplugged from the electrical socket. If you are using batteries to operate the Wireless Remote Speaker, remove them to save battery power. To continuously increase volume, press and hold the button down until the desired volume level is reached. NOTE Do not turn up the volume while listening to a portion of audio with very low-level inputs or no signals. If you do, the speaker may become damaged when a peak level portion is played. To continuously decrease volume, press and hold button down until the desired volume level the is reached. NOTE Before playing back audio from any source, decrease the volume of the connected device to avoid damaging the speaker. 8 However, you have the option to fix the location of your speaker against the wall using the supplied L-shaped wall-mount unit and 4 screws: 1. Position the wall-mount unit's vertical panel onto the area of the wall where you would like to hang the unit. Secure the 15mm (0. 6 in) corresponding holes of the vertical panel until it is firmly fixed against the wall. [. . . ] If there is still no response, the speaker's control panel membrane may be damaged. The channel on the transmitter (e. g. , A) is set to a different channel from the speaker (e. g. , B). Both units should be set to the same channel to ensure proper signal transmission (e. g. , both set to A or both set to B). How do I eliminate signal jamming or interference?Signals transmitted from devices nearby may jam or interfere with signals transmitted from the transmitter to speaker. [. . . ]