User manual OREGON SCIENTIFIC WMR112A

[. . . ] Position the main unit and other units within effective range (300 feet). Insert four UM4 or "AAA"-sized alkaline batteries for backup purpose. Position the units within the range and be sure the transmission path is clear of interference and obstacles. Note: The thermo-hygrometer should be installed outdoors and in locations that best measure the weather elements which the instruments are designed for. [. . . ] In this case, "---" will be displayed when [CHANNEL] is pressed and to display readings from the THGR268 or any other remote sensor choose from the apropriate channel 1, 2 or 3 when outdoor temperature is selected. Press [CHANNEL] to go from the outdoor reading taken by the outdoor thermo-hygrometer to those taken by individual sensors i. e. The outdoor thermo-hygrometer is also capable of detecting the dew point temperature as well as the wind chill reading. To display such information, press the outdoor/channel temperature window repeatedly. The temperatures can be displayed in degree Centigrade (°C) or Fahrenheit (°F). The selected unit will apply to all temperature displays in this window. Press the weather forecast and barometric reading window repeatedly till the "sea-level" icon is displayed. INDOOR AND DEW POINT TEMPERATURES The current indoor and dew point temperatures, taken by the indoor baro-thermo-hygrometer, are displayed on the indoor temperature window. They can be displayed in degree Centigrade (ºC) or Fahrenheit (ºF). The selected unit will apply to all temperature displays in this window. To display the dew point temperature for a channel, press the window again when the channel temperature is located. Press the outdoor/channel temperature window repeatedly until "DEW" icon appear. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. OUTDOOR AND CHANNEL HUMIDITY The relative humidity readings taken by the outdoor thermohygrometer and separate thermo-hygro sensors are displayed on the outdoor/channel humidity window. As this window can display up to four different sets of data, specify the instrument or channel you want to read. Press [CHANNEL] to go from the outdoor reading taken by the thermo-hygrometer to those taken by individual sensors (Channel 1, 2 or 3). Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. 3. The time and date of the record will also be displayed alternatively with "STAMP" icon in the clock window. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. AUTO SCANNING FUNCTION The auto scanning function is avalibable for the outdoor/channel window for both the temperature and humidity. The main unit will start scanning from the active temperature and humidity display. To exit the auto scanning routine, press any window or control button. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: o Reorient or relocate the receiving unit. [. . . ]