User manual OREGON SCIENTIFIC WMR112-E

[. . . ] With the aid of a compass, face the red marking south before mounting the anemometer. Put drops of water on the cross at the base on the rain collector to check the leveling. Water stay at position 1 - 4 means the gauge is not leveled The wind speed and direction window on the main unit should read 180° if the main unit is installed. Use metal ring to adjust the leveling of the rain collector if necessary. `AA' Um3 1. 5V METAL RING The thermo-hygrometer measures outdoor temperature and humidity. THE SOLAR TRANSMITTERS RESET The solar transmitters make use of solar energy to power the instruments they are connected to. [. . . ] To display the dew point temperature, press the indoor temperature window until the "DEW" indicator is displayed. The time and date of the record will also be displayed alternatively with "STAMP" icon in the clock window. The display will automatically return to the current temperature or dew temperature whatever is displayed before if no key is pressed for about one minute. Press [MEMORY] to check if the memory is clear. To disable the radio reception function: 1. WEATHER FORECAST The weather forecast is displayed in the weather forecast and barometric reading window. The selected unit will apply to all temperature displays in this window. Note: The unit of all temperature related display will be changed simultaneously. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. The time and date of the record will also be displayed alternatively with "STAMP" icon in the clock window. To display the dew point temperature for a channel, press the window again when the channel temperature is located. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. Press the outdoor/channel temperature window or repeately until "DEW" icon appear. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. The time and date of the record will also be displayed alternatively with "STAMP" icon in the clock window. To display the dew point temperature for a channel, press the window again when the channel temperature is located. Press the outdoor/channel temperature window or repeately until "DEW" icon appear. Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. OUTDOOR AND CHANNEL HUMIDITY The relative humidity readings taken by the outdoor thermohygrometer and separate thermo-hygro sensors are displayed on the outdoor/channel humidity window. As this window can display up to four different sets of data, specify the instrument or channel you want to read. Press [CHANNEL] to go from the outdoor reading taken by the thermo-hygrometer to those taken by individual sensors (Channel 1, 2 or 3). Press [CHANNEL] for the outdoor thermo-hygrometer or the desired channel. The time and date of the record will also be displayed alternatively with "STAMP" icon in the clock window. To clear the memory, 1. [. . . ] Before resetting the main unit, you should do the same for all weather instruments to ensure correct transmission and reception of signals. MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. Abrasive cleaning agents may scratch the plastic parts and corrode the electronic circuit. [. . . ]