User manual OREGON SCIENTIFIC SL928M-E

[. . . ] [ MODE ] BUTTON Changes an operating mode or enters a setting procedure D. [ START/STOP ] BUTTON Starts or stops the stopwatch, timer or pacer, changes or increases a value E. [ RECALL ] INDICATOR Indicates the RECALL function is active F [ LAP ] INDICATOR . [. . . ] The [ ] indicator will flash indicating the stopwatch is still running in the background. Press [LAP] after stopping to clear the display and register another segment. The effective memory left for laps will be reduced as the number of registered segments increased. The free memory remained will be shown on the display when a segment is registered. Chronograph mode can be run at the background when the stopwatch is started and go to the other display mode. Stopwatch can still be operated of all segment or lap memory is being used up. HOW TO SELECT THE CHRONOGRAPH IN UNITS OF HOURS, MINTUES OR SECONDS Refer to (FIG. Four different chronograph units of display: hour:minute:second with 1/100 sec. resolution; hour with 1/100000 hr resolution and minute with 1/1000 min resolution. Within each segment it is allowed only one single unit of display. HOW TO RECALL CHRONOGRAPH RECORDS Refer to (FIG. The last recorded segment will be displayed with its time and date stamp when advance from chronograph mode. Two beeping sounds will be heart to indicate the end of lap record for each segment. HOW TO ERASE CHRONOGRAPH RECORDS Refer to (FIG. Note: The record of the current running chronograpy cannot be deleted. 4 HOW TO USE THE TIMER Refer to (FIG. There are three modes of operation can be chosen : CS (count down and stop), CU (count down and count up) or CR (count down, automatic reload and repeat). The maximum count down or count up time is 23 hours, 59 minutes and 59 seconds. A pre-alert tone will be emitted at five second before completion of a count cycle and an alert tone will be emitted for 10 sec. Timer can be run at the background when the timer is started and go to the other mode of display. HOW TO USE THE PACER Refer to (FIG. [. . . ] Do not subject the unit to snow or excessive force, shock, dust, temperature or humidity. Do not tamper with the unit's internal components. 6 SPECIFICATIONS Real time clock Stop watch Timer: Pacer Power Operating temperature Storage temperature Weight : 12/24 hour with hour/minute/second : 00:00:00 to 23:59:59 (hrs:min:sec) : 00:00:00 to 23:59:59 (hrs:min:sec) : 30-240 beeps per minute : 1pcs CR2032 3V battery : -10oC to +50oC (14oF to 122oF) : -20oC to +60oC (-4oF to 140oF) : 52 g (including battery) 7 GB GB GB LEGEND : ITALIC ITALIC - PRESS - PRESS & HOLD FOR 2 SEC. - FLASHING - FAST ADVANCE F LEGENDE : ITALIQUES ITALIQUES - APPUYER - APPUYER PENDANT 2 SEC. [. . . ]