User manual OREGON SCIENTIFIC RRM968PU

[. . . ] [ ] Radio-reception icon - Indicates the strength of the reception of clock radio signal A5. [AM/FM] BUTTON - Press to change between AM or FM radio band (when Radio is On) A7. [+ TUNING -] BUTTONS - Press to increase/ decrease the frequency setting (when Radio is On) - Press and hold for 2 seconds to trigger radio auto-search function (when Radio is On) A8. [STATION] BUTTON - Press to switch among the 8 preset stations in the respective AM or FM radio band (when Radio is On) - Press and hold for 2 seconds to enter the preset radio station setting mode (when Radio is On) A9. [. . . ] Clock with Weekday ----------------------------------------------------------Clock (2nd Zone-time)/Indoor Temperature 4. Clock with Weekday(2nd Zone-time) ---------------------------------------------------------Calendar (2nd Zone-time)/Indoor Temperature HOW TO ENABLE OR DISABLE AUTORECEPTION To disable the automatic reception of radio signal, press and hold [VOL -] for 2 seconds. The reception icon will disappear and the unit will stop receiving the radio signal. To activate the signal reception again, press and hold [VOL +] for 2 seconds. The reception icon will appear again and start blinking to indicate auto reception of radio signal. SETTING THE CLOCK AND CALENDAR MANUALLY When the automatic radio reception is disabled, the main unit can be set manually. Follow the same procedures to set the 12/24-format, hour, minutes, year, "mm:dd" or "dd:mm" calendar display format, month, day, display languages and hourly chime on/off mode. If changes are made after the minute adjustment, the value of seconds will be reset and start from zero. For the day-of-week you can select among 5 languages -- English (E), French (F), German (D), Italian (I) and Spanish (S). 6 DISPLAY MODES SELECTION Press [MODE] in the normal display mode to scroll through the calendar clock display modes: 1. Clock with Second --------------------------Calendar/Indoor Temperature 2. Clock with Weekday --------------------------------------------Calendar/Indoor Temperature Language Langues Sprache Lingue Idiomas Lingua English Anglais Englisch Inglese Inglés Inglês French Français Französisch Francese Francés Francês German Allemand Deutsch Tedesco Alemán Alemão Italian Italian Italienisch Italiano Italiano Italíano Spanish Espagnol Spanisch Spagnolo Español Espanhol Day-of-the-week Affichage du jour Giorno della settimana Día de la semana Monday Lundi Montag Lunedí Lunes Segunda Tuesday Mardi Dienstag Martedí Martes Terça Wednesday Mercredi Mittwoch Mercoledí Miércoles Quarta Thursday Jeudi Donnerstag Glovedí Jueves Quinta Wochentaganzeige Dia de Semana Saturday Samedi Samstag Sabato Sábado Sábado Sunday Dimanche Sonntag Domenica Domingo Domingo Friday Vendredi Freitag Venerdí Viernes Sexta DISPLAYING AND SETTING THE ALARM This unit is equipped with a daily alarm. To set the corresponding alarm time, follow the instructions below: 1. In Beep alarm mode, a 2-minute crescendo alarm will be turned on when the alarm time is up. In Radio alarm mode, when alarm time is up, the radio will be turned on and remained on for 2 hours until it is manually deactivated. If Radio alarm mode is being chosen, the radio will be automatically turned on and the Radio Station Number will flash. Please note that in this Radio Alarm mode, manual tuning cannot be used to set the station. 7 GB GB When the pre-set time arrives, beep sound / radio will be turned on. To enable/disable the alarm, press [ALARM ON/OFF ] when the main unit is in Alarm display mode When [SNOOZE/LIGHT] is pressed to stop the alarm sound (only when Beep Alarm mode is selected), the unit will re-alarm again after 8 minutes. To disable the snooze function, press [ALARM] or [ALARM ON/OFF ] or press and hold [SNOOZE/LIGHT] for 3 seconds when alarm goes off. Please note that when Radio is on while Beep Alarm goes off at the same time, the Radio will be temporarily stopped until the Beep Alarm has been turned off. Section II - Digitally-tuned PLL AM/FM Radio HOW TO USE THE RADIO Before you start - All radio functions can only be operated when Radio is powered on. The radio will be turned on at the last preset radio station and volume. To change the radio frequency, press [AM/FM] to select the radio band. [. . . ] Only use fresh batteries as specified in the user's instructions. Always read the user's instructions thoroughly before operating the unit. To maintain good performances, do not use the units in places which are extremely hot, cold, dusty or humid. In particular, keep the units away from: High Humidity areas (e. g. , bathroom) Extreme hot areas (e. g. , near a heater) Areas exposed to direct sunlight Digital - tuning Radio AM band Frequency FM band Frequency Station Digital Volume Temperature Measurement Main Unit Indoor Temperature Measuring Range Temperature Resolution Power : -5°C to +50°C (+23°F to +122°F) : 0. 1°C (0. 2°F) : - 4 pcs of AA or "UM-3" 1. 5 V batteries - 4. 5 V AC Adapter (for continuous projection) Weight Dimensions Note on Battery : 379g (without battery) : 153 x 126 x 40mm ( L x W x H ) : Batteries included (if any) are for demonstration purpose only. [. . . ]