User manual OREGON SCIENTIFIC RRM326P-DUAL BAND RF PROJECTION CLOCK WITH FM RADIO

[. . . ] 5 FM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Radio Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Insert batteries before first use, matching the polarity (+ and -) as shown below. Press RESET after each battery change. AC ADAPTOR The batteries serve as a back-up power supply. For continuous use of the projector, install the AC adaptor at the base of the unit as shown below. NOTE To help conserve energy, turn the PROJECTION ON switch to OFF when you do not wish to use it. ABOUT RF RECEPTION NOTE Do not use rechargeable batteries with this product. BATTERY ICON MEANING Batteries are low, or there are no batteries installed and only the adaptor is connected 4 RRM326P_EN_output 4 03/09/2005, 14:44 This clock can automatically synchronize the date and time with official time-keeping organizations in Frankfurt (Germany) and Rugby (England). The unit can pick up a Radio Frequency (RF) signal when it is within 1500km (932 miles) of these locations. To select the most suitable radio signal for your location, slide the UK / EU switch to the appropriate setting. NOTE For best results, place the clock away from metal or electrical objects, and near a window with a clear view to the sky. TURN THE RADIO RECEPTION ON / OFF To turn the radio reception ON: · Press VOL and hold for 2 seconds. · The RF reception icon will appear and flash on the display to indicate it is searching for the RF signal. Once batteries have been installed in the clock, the reception icon will flash to indicate it is searching for a signal. When the reception signal has been received the reception icon will show the signal strength by displaying between 0 and 3 waves: STRONG SIGNAL WEAK SIGNAL NO SIGNAL CLOCK / CALENDAR CLOCK / CALENDAR DISPLAY Press MODE to toggle between 3 types of display (Clock with seconds, Clock with day, Clock with time zone offset). SET CLOCK / CALENDAR 1. +1), the time displayed will be the RF clock time plus 1 hour. To turn the radio reception OFF: · Press and hold VOL for 2 seconds. · The RF reception icon will disappear from the display. 5 RRM326P_EN_output 5 03/09/2005, 14:44 EN EN 2. The settings appear in the following order: Time zone hour offset, 12 / 24 hour format, hour, minute, year, MM / DD or DD / MM format, month, day and language for day of the week. Press ALARM, ALARM ON / OFF, TUNING or , SLEEP, or RADIO to exit the Clock Setting Mode. 3. Press TUNING or to change radio frequency, press and hold for 2 seconds to enable auto-search for an available frequency. RADIO STATIONS To set a radio station, press and hold STATION while on a frequency. SLEEP The radio is equipped with a countdown sleep timer that can be set to switch the radio off after up to 120 minutes. Use the SLEEP button to change the sleep time setting (120, 90, 60, 45, 30, 15, 0). Press any key to exit sleep mode ­ the sleep timer will be automatically activated. FM RADIO This product has a built-in FM radio for your entertainment. In order to conserve power, the FM radio only works when the AC adaptor is plugged in. 6 RRM326P_EN_output 6 03/09/2005, 14:44 Press SNOOZE / LIGHT to activate the backlight for 5 seconds. ALARM ALARM DISPLAY AND SOUND This product has two types of daily alarm that can be set to go off at the same time every day. Press ALARM at any time to toggle between the calendar and the alarm display. [. . . ] Observe the following guidelines: · Do not clean any part of the product with benzene, thinner or other solvent chemicals ­ this may cause permanent damage that is not covered by the guarantee. Do not subject the product to extreme force, shock, or fluctuations in temperature or humidity. Remove the batteries if storing this product for a long period of time. Do not scratch the LCD display. NOTE You can also press the SNOOZE / LIGHT button to project the time and alarm status for 5 seconds. RESET THE CLOCK Insert a thin blunt instrument into the hole below RESET to return to the default settings. [. . . ]