User manual OREGON SCIENTIFIC RMB383-ME

[. . . ] [RELEASE] PUSH BUTTON Press to release the plugged-in antenna 2 BATTERY INSTALLATION This unit is operated by 2 pieces of UM-4 or AAA-sized 1. 5V batteries. JAPAN-EAST (JJY-40 signal) 1 2 3 Simply plug in the antenna as shown and the auto-reception of the radio signal will be activated automatically. 'AAA' UM-4 1. 5V 'AAA' UM-4 1. 5V 'AAA' UM-4 1. 5V 'AAA' UM-4 1. 5V Note: Make sure the polarities are correct. When the power level of the installed batteries is low, the low battery indicator [ ] will light up. [. . . ] The radio-reception icon will disappear and the unit will NOT respond to radio signals. To enable the feature again, plug in the antenna again or press and hold [v] for 2 seconds to force signal reception. The radio-reception icon will be shown again and it will start blinking to initiate reception automatically. ABOUT RADIO RECEPTION When the unit is within range of its respective radio signal, the radio control mechanism will override all manual settings unless radio reception has been deactivated. After battery installation (with the antenna plugged in), the unit will start to search for a radio signal automatically. When it is receiving radio signal, the radio-reception icon will start to blink. A complete reception generally takes about 2 to 10 minutes, depending on the strength of the radio signal. The antenna icon indicates the quality of reception. HOW TO SET THE CLOCK & CALENDAR MANUALLY 1. 5 Strong Weak No Reception Receiving GB GB Time zone setting allow you to display hours for many other city , p. e. if the unit is it at San Francisco (-8 GMT) and you want to know Hong Kong (+8 GMT) hour you must set 16 as offset. For the language for day-of-week, you can select "E" for English, "D" for German, "F" for French, "I" for Italian or "S" for Spanish. The day-of-week can be expressed as an abbreviation in five different languages. The languages and their selected abbreviations for each day of the week are shown in the language chart below. Day-of-the-week Language English French German Italian Spanish Monday Tuesday Wed. Follow the same pattern to set the year, date format (month-day or day-month), month, day, display language (English [E], German [D], French [F], Italian [I] or Spanish [S]) for day-ofthe-week and hourly-chime on/off. 6 Note: When changes are made to the minute, the seconds will start from zero. The unit will also save all changes and return to normal display automatically after the unit has been left idle for a minute. ABOUT THE HOURLY-CHIME FUNCTION When the Hourly-Chime is set to the on-mode, the indicator [ ] will light up and a beep sound as a reminder will be given out at the beginning of each hour. ABOUT THE ALARM This unit is equipped with 2 daily alarm functions. ] for 2 seconds. function, press any key (except [ SNOOZE ] ) when the alarm ] for goes off. Alternatively you can press and hold [ SNOOZE 3 seconds when the snooze function is on. INDOOR TEMPERATURE DISPLAY This unit is capable of measuring the indoor temperature within a range of -5°C to +50°C (23°F to 122°F). To change the temperature display unit, press and hold [TEMP] for 2 seconds to toggle between degree Celsius (°C) or degree Fahrenheit (°F). If the temperature goes below or above the range measured, the display will show "LLL" or "HHH" respectively. 3. [. . . ] They may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. [. . . ]