User manual OREGON SCIENTIFIC RM822

[. . . ] Thursday Friday Saturday Sunday English INTRODUCTION Congratulations on your purchase of the Travel RF controlled Clock (RM822). It can automatically synchronize its current time and date when brought within an approximate 1500 km radius of the radio signal DCF77 generated from Frankfurt, Germany (the UK version from MSF Rugby, England). Other features of the RM822 include: Back light for easy reading in the dark Displays time, date and day of the week in 4 languages (E/F/G/I) A second time-zone display with time, date and day-of-the-week 2 alarm times with 8-minute snooze function 2-minute crescendo alarm that increase in volume & low battery indication. [. . . ] Press [ Setting Minutes Hours Adjust with Adjust with or or Action and confirm with [ and confirm with [ ]. Press a final time to exit alarm set mode. LOCKING AND UNLOCKING THE UNIT The RM822 / RM823 has a special locking feature that locks all keys to prevent accidental operation of the unit. The unit must be unlocked before activating any keys. Setting Alarm Two - Enter alarm-2 setting mode and follow instructions as for alarm 1. ABOUT ALARM SOUND The four-step crescendo function allows the alarm to start off gently and step up its intensity four times every 20 seconds. Without interruption, the alarm will activate for a total of two minutes. If a second alarm activates when the first alarm is sounding, the first alarm will be automatically disabled. To stop an alarm sound: - To stop the alarm, press [ ], the alarm will stop and will activate at the same time the following day. - To disable the alarm, press [ ON/OFF ], the alarm will stop and it is not active, it will not activate the following day. CALENDAR CLOCK DISPLAY MODES The RM822 /RM823 supports four display modes in the sequence of: MODE 1 Local Time Hour, Minute, Seconds ------------------------------------------Day, Month MODE 2 Local Time Hour, Minute, Day-of-the-Week ------------------------------------------Day, Month MODE 3 Local Time / Second Time-Zone Time ( localtime ) Hour, Minute, Day - of - the - Week ------------------------------------------( Second time - zone time ) Hour, Minute MODE 4 Second Time-Zone Hour, Minute, Day-of-the-Week ------------------------------------------Day, Month Display description for each time / date / time-zone mode To select a different time-display mode: Press [MODE]. Note: The bottom line of the display will be replaced by the alarm time if [ ] is pressed. FIG. UP [ ] button Increases the value of a setting Initiates radio reception (Press and hold for rapids settings) K. DOWN [ ] button Decreases the value of a setting Stops radio reception (Press and hold for rapids settings) L. [RESET] button Resets the unit to its original factory settings AAAî size batteries HOW TO USE THE SNOOZE The Lite Touch feature enables you to activate the 8 minute snooze by gently rocking the RF clock backwards on its stand with the touch of your fingers. [see FIG. D] LITE TOUCH HiGloTM BACKLIGHT Using the Lite Touch feature, the display will activate for five seconds so you can see the display in the dark. [see FIG. D] HOW TO RESET THE UNIT The RESET button allows you to return all settings to its factory values, which are, 1-1 (1st of January) for date, 00:00 for time and 0:00 for alarm, which will be deactivated. The button is required only when the unit is not operating in a favorable way, such as in the rare case of a malfunction. FIG. B BATTERY INSTALLATION The unit uses two (2) UM-4 or To insert batteries: 1. Insert the batteries strictly according to the polarities shown therein. [FIG. [. . . ] 2. Setting Hours Minutes Action Adjust with Adjust with or or and confirm with MODE and confirm with MODE Electromagnetic compatibility (Article 3. 1. b of the R&TTE Directive) Applied standards ETS 300 683 : 1997 EN 300 220-1 : 1997 (if applicable) Note: Once you modify the minutes, the seconds are set to 00î. Current Date Month Abbreviated, 4-language day-of-the-week Day-of-the-week Offset for other time zone Adjust with Adjust with or or and confirm with MODE and confirm with MODE Efficient use of the radio frequency spectrum (Article 3. 2 of the R&TTE Directive) Applied standards EN300 220 1 : 1997 (if applicable) CAUTION ó ó ó The content of this manual is subject to change without further notice. Due to printing limitation, the displays shown in this manual may differ from the actual display. [. . . ]