User manual OREGON SCIENTIFIC RM818P R7

[. . . ] 13 Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 The Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 The Reset Hole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The following items should be included in this package: · Clock unit · Batteries (2 x UM-4 AAA-sized 1. 5V) · User manual BATTERIES To load the batteries: 7/14/04, 3:58 PM 1. Always use the correct battery type (2 x UM-4 AAA-sized 1. 5V batteries). NOTE Replace the batteries whenever the low battery icon is shown , the display is dim, or the display does not illuminate when the power is on. Replace all the batteries at the same time-it is dangerous to mix old and new batteries. ADAPTOR By plugging in the adaptor, the projector will project the time on the wall / ceiling continuously. 7 RM818P English R7 7 7/14/04, 3:58 PM EN EN RADIO RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of the radio signal. NOTE When the unit is receiving the signal, the Radio Reception symbol with start to blink. Generally, complete reception takes around 2 to 10 minutes, depending on the strength of the signal. To select the most suitable radio signal for your location, slide the [EU / UK] switch to the appropriate setting. RADIO RECEPTION DESCRIPTION NOTE Reception can be affected by a number of factors. For best reception, place the device away from metal objects and electrical appliances. Other causes for signal interference include electrical transmission tower, steel reinforced construction, and metal siding. Reception is ideal when placed near a window. Even though there are areas that may have more difficulty in receiving a signal, the Radio-controlled / RF clock contains accurate quartz movement and will retain precise timing if the signal is missed on a rare occasion. STRONG SIGNAL WEAK SIGNAL Strong reception of radio clock signal. No reception of the radio clock signal. NO SIGNAL 8 RM818P English R7 8 7/14/04, 3:58 PM ENABLING / DISABLING RECEPTION To manually enable the reception of the RF signal: 1. Press and hold the UP button for 2 seconds until the Radio Reception symbol appears and flashes. Press and hold the DOWN button for 2 seconds until the Radio Reception symbol disappears. CLOCK MODE The Clock mode has 3 types of display: a) HH_MM_SS / Calendar SETTING THE CLOCK MANUALLY To adjust the clock settings manually without automatic RF synchronization, remember to disable the Radio Reception first. Press and hold the DOWN button for 2 seconds until the Radio Reception symbol disappears. b) HH_MM_Day-of-the-Week / Calendar 9 RM818P English R7 9 7/14/04, 3:58 PM EN EN c) HH-MM-ZONE OFFSET / Calendar HOUR-SETTING MODE NOTE Press the CLOCK button to toggle between the three modes. MINUTE-SETTING MODE 10 RM818P English R7 10 7/14/04, 3:58 PM 4. Use the UP and DOWN buttons to select the time format (whether 12-hour to 24-hour format). Press the CLOCK button to set the date format by using the UP and DOWN buttons. Press CLOCK again to set the date, and then press ALARM button to exit the set mode. 7/14/04, 3:58 PM EN EN DATE FORMAT SETTING MODE YEAR-SETTING MODE MONTH SETTING MODE NOTE The order of the flashing items is: time zone offset, 12 / 24hr format, hour, minute, year, DM< MD, month, day, language, exit clock setting mode. SELECTING A LANGUAGE The main unit can display the weekday in five different selectable languages: English, German, French, Italian and Spanish. Also, the snooze function will be disabled if 1) the clock time is changed; ON / OFF button is pressed. [. . . ] The warnings given here provide important safety information and should be observed at all times. Contact the retailer or our customer service department if it requires servicing. They can cause injuries, burns, or property damage as a result of contact with conducting materials, heat, corrosive materials or explosives. Remove the batteries before storing the product for long periods of time. [. . . ]