User manual OREGON SCIENTIFIC RGR122

[. . . ] FOUR-LINE DISPLAY - For displaying the total rainfall, current rainfall or rainfall history, indoor temperature and calendar clock B. RAIN RESET / SINCE BUTTON Displays the start day for total rainfall Presses and hold to clear the total and current rainfall Press and hold to reset the date stamp I. [°C/°F] SWITCH - Selects between degree Centigrade (°C) and Fahrenheit (°F) J. REMOVABLE TABLE STAND - For securing the main unit on a flat surface C. [. . . ] Note that this will also clear the total rainfall record. "AA" U M3 1. 5V "AA" U M3 1. 5V 5. Press and hold to reset the date stamp to current date. RAINFALL ALARM To set the rainfall alarm, 1. Use [RAIN HIST / ] to increase the setting or [TEMP MEM / ] to decrease the setting. 4 LOW BATTERY WARNING There are two low-battery indicators, one appears on the total rainfall display section and one on the indoor temperature display section. The former represents the batteries of the remote rain collector, the latter those of the main unit. Replace the batteries immediately when the respective indicator lights up. The alarm will go off for one minute when the rainfall reaches the preset value and the rain alarm indicator will flash. Once the rain alarm is on the indicator will not stop flashing unless [RAIN AL] switch is turned off or the rain alarm value is reset or normally pass to next day. To stop the alarm and reminder beep, press any button or reset the rainfall alarm value. To deactivate the alarm all together, turn off the [RAIN AL] switch. CALENDAR CLOCK The calendar clock is displayed on the bottom line of the display. When active, the daily alarm will go off for one minute at the set time and the daily alarm indicator will flash. The alarm is still active and will go off at the set time the following day. To deactivate the function all together, turn off the [CLOCK AL] switch. DISCONNECTED SIGNALS If without obvious reason the display for the main unit goes blank, press [RAIN SEARCH] to enforce an immediate search. - The transmission is within range and path is clear of obstacles and interference. Then press [RAIN SEARCH] again. INDOOR TEMPERATURE The indoor temperature is displayed on the third line of the LCD display. Use the [°C/°F] switch to select between degree Centigrade and Fahrenheit. Use [TEMP MEM] to display the maximum and minimum temperatures in record. 5 GB GB THE RESET BUTTON This button is used only when the unit is operating in an unfavorable way. All settings will return to their default values. SPECIFICATIONS Main unit Display rainfall range (total) : 0 - 999. 99 inches (0 ­ 25, 400 mm) : 0 - 99. 99 inches (0 ­ 2, 540 mm) : 0. 04 inches (1 mm) : 23. 0°F to 122. 0°F (-5. 0°C to +50. 0°C ) : 23. 0°F to 122. 0°F (-5. 0°C to +50. 0°C ) : (0. 1°C) to 0. 2°F PRECAUTIONS This product is engineered to give you years of satisfactory service if you handle it carefully. They may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. [. . . ] Should this not be possible, contact our customer care department for assistance and a return material authorization. Please retain your retail receipt as you may be asked to provide a copy of it for proof of date purchased. This warranty does not cover product subjected to abuse, misuse, accidental damage or tampering. CAUTION -- The content of this manual is subject to change without further notice. -- Due to printing limitation, the displays shown in this manual may differ from the actual display. [. . . ]