User manual OREGON SCIENTIFIC MIRROR WEATHER STATION MR238

[. . . ] 4 AC Adaptor (Main Unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 VFD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Activate / Deactivate the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 7 INTRODUCTION Thank you for selecting the Oregon ScientificTM MR238 Mirror Weather Station. This powerful device bundles time keeping, weather forecasting, indoor and outdoor temperature and humidity readings into a single mirror display you can use from the convenience of your home. In this box, you will find: · · · Main unit (MR238) with wall-mount holder Remote sensor (RTGR328N) AC adapter NOTE The THGR328N (5-Channel) and THGR228N (3-Channel) remote sensors are also compatible with this weather station. It contains practical stepby-step instructions, as well as technical specifications and warnings you should know. 1 MR238(EN)(OP) 1 9/27/04, 10:50 AM EN EN PRODUCT OVERVIEW FRONT VIEW 1 2 7 8 3 4 5 6 9 10 11 1. SNOOZE / ACTIVATE touch panel ­ snooze function / activate display 9. MEMORY button - view current, maximum and minimum temperature and humidity readings 11. 5. Stand °C / °F button RESET button AC adaptor hole VFD control switch (Display On/ Auto/ Off) You can adjust the angle of the weather station as shown below: 1 2 3 4 5 VFD DISPLAY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1. 17. Alarm setting Alarm is activated Time Offset time-zone Channel number (1-5) / reception status RF clock reception icon Date / calendar / year Weather display MAX / MIN temperature Temperature (°C / °F) Temperature trend Low battery icon for remote sensor Humidity trend Sensor channel number Humidity Comfort levels MAX / MIN humidity 2 MR238(EN)(OP) 2 9/27/04, 10:50 AM REMOTE SENSOR (RTGR328N) REMOTE SENSOR ­ BACK VIEW 1 2 3 4 5 6 1 2 7 3 8 1. Temperature / Humidity 3 MR238(EN)(OP) 3 9/27/04, 10:50 AM EN EN GETTING STARTED INSTALLING THE WALL-MOUNT HOLDER To install the wall-mount holder: 1. Attach the stand to the wall-mount holder and screw to affix firmly in place. Adjust the angle of the mirror. VFD DISPLAY ACTIVATE / DEACTIVATE THE DISPLAY Slide the VFD control switch at the back of the weather station to different display options: · · · Display ON ­ The VFD display and the LED light bars will always be on. Display OFF ­ The VFD display and the LED light bars will always be off. Display AUTO ­ The VFD display and the LED light bars will be on when any key is pressed or the SNOOZE / ACTIVATE touch panel is triggered. The display and the light bars will be turned off after 30 minutes if no other keys are pressed. REMOTE SENSOR This product is shipped with the RTGR328N Thermo / Hygro Sensor. The main unit can collect data from up to 5 sensors (5 Thermo / Hygro Sensors). The THGR328N and THGR228N sensors are also compatible with this weather station. The RTGR328N Sensor collects temperature and humidity readings, and signals from official time-keeping organizations for the radio-controlled clock. SWITCH Channel Radio Signal Format OPTION If you are using more than one sensor, select a different channel for each sensor. To fold out the stand: 1 2 5 6 AC ADAPTOR (MAIN UNIT) Please install the AC adaptor at the back of the unit as illustrated. (Hiding of the adaptor wire can only happen when the wall-mount holder is installed). For best results: · · · · · · Insert the batteries and select the unit, channel, and radio signal format before you mount the sensor. Do not place the sensor more than 30 metres (100 feet) from the main (indoor) unit. Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture. [. . . ] Also images not drawn to scale. SELECT MEASUREMENT UNIT Press the °C / °F button to the desired setting. NOTE If you select a sensor that collects only temperature data, the humidity will not be shown. TROUBLESHOOTING PROBLEM Calendar Clock Temp SYMPTOM Strange date / month Cannot adjust clock Cannot auto-synch REMEDY Change language Disable radio-controlled clock 1. Press RESET 2. Manually activate radio-controlled clock Temperature is out-of-range Check batteries Shows "LLL" or "HHH" MINIMUM / MAXIMUM RECORDS Press MEMORY repeatedly to view current, maximum and minimum records for the selected sensor. Remote sensor Cannot locate remote sensor 6 MR238(EN)(OP) 6 9/27/04, 10:50 AM SPECIFICATIONS MAIN UNIT DIMENSIONS LxWxH Weight REMOTE UNIT DIMENSIONS LxWxH Weight TEMPERATURE Unit Indoor Range Outdoor Range Resolution Comfort Display RELATIVE HUMIDITY Range Resolution REMOTE UNIT (RTGR328N) RF frequency Range Transmission Channel No. Unit RADIO-CONTROLLED CLOCK Synchronization Clock display Hour format Calendar languages (E, G, F, I, S) Alarm MAIN UNIT Power adapter THERMO / HYGRO REMOTE UNIT Batteries 2 x UM-3 (AA) 1. 5V AC adapter 2-minute crescendo Auto or disabled HH:MM:SS 12hr AM/PM (MSF format) 24hr (DCF format) DD/MM or MM/DD; Day of the week in 1 of 5 433 MHz Up to 30 metres (100 feet) Approx. [. . . ]