User manual OREGON SCIENTIFIC JOHN DEERE BAR122HGLA

[. . . ] 11 Indoor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] FOUR-LINE LCD DISPLAY: For displaying the total rainfall, current rainfall or rainfall history, indoor / outdoor temperature and clock / calendar SEARCH: Press and hold to enforce a search for the rain gauge and remote thermo sensor in - mm: Selects between inch and millimeter rainfall measurement 2. 5. ((. )): Displays the rain alarm setting; press and hold to enter the rain alarm setting mode SINCE: Toggles between displaying the start day or start year for total rainfall; press and hold to clear the previous rainfall start time and reset the rainfall counter to start again HISTORY: Toggles between rainfall history and daily rainfall : Enables or disables the rainfall alarm REMOVABLE TABLE STAND: For securing the main unit on a flat surface 1. 5. ANTENNA: Receives radio signal from rain gauge and remote thermo sensor : Increases setting values; press and hold for rapid increase : Decreases setting values; press and hold for rapid decrease WALL MOUNT HOLE TIME / SET: Toggles among the time, day, year and rainfall display; press and hold to enter the time setting mode RESET: Returns all settings to their default values °C / °F BUTTON: Selects between °C and °F BATTERY COMPARTMENT: Accommodates 2 x UM-3 or AA-sized batteries 6. 8. BACK VIEW 4 1 2 3 5 6 7 8 3 RGR126(R13)-4(final) 3 4/6/05, 5:46 PM EN EN LCD DISPLAY RAIN GAUGE (PCR122) 1. ANTENNA: Transmits radio signal to main unit BATTERY COMPARTMENT: Accommodates 2 x UM-3 or AAsized batteries 1 2. 2 3 4 1 1. 4. Today's Rainfall, Rainfall History, Rainfall Alarm, Start Date of Total Rainfall Record, Time / Date Rain Gauge RF Reception Status, Total Rainfall Thermo-sensor RF Reception Status, Outdoor Temp Indoor Temp 2 4 RGR126(R13)-4(final) 4 4/6/05, 5:46 PM REMOTE THERMO SENSOR (THN122N) 1. 2 3 4 WALL MOUNT HOLE RESET hole CHANNEL number (1-3) BATTERY COMPARTMENT 5 RGR126(R13)-4(final) 5 4/6/05, 5:46 PM EN EN GETTING STARTED Position the main unit, rain gauge, and thermo sensor within effective range: · Rain gauge - 328 feet / 100 meters · Thermo sensor - 98 feet / 30 meters IMPORTANT It is recommended that you follow the sequence below when setting up the units: 1. Set up the rain gauge, then press and hold SEARCH on the main unit and wait until you receive a signal. Set up the thermo sensor, then press and hold SEARCH on the main unit and wait until you receive a signal. In the event that you do not obtain a signal from a remote unit please repeat the process above. 2. Press RESET, or press and hold SEARCH on the main unit to initiate operation. The reception icon on the main unit will blink while it is searching for the sensor or rainfall gauge. NOTE Every time the battery in the main unit is changed, repeat installation before use. Caution: Other sensors using the 433 MHz transmission frequency may influence the rainfall reading. TOTAL RAINFALL The total rainfall is displayed on the 2nd line of the LCD display. To display the commencing date of the total rainfall record, press SINCE. 10 RGR126(R13)-4(final) 10 To clear the existing commencing date and reset it to start again, press and hold SINCE. The total rainfall will now be equal to the today rainfall and the unit will start again to collect the rainfall data. RAINFALL ALARM The rain alarm value can be displayed at any time by pressing (( · )). The rain alarm indicator will light up. The alarm will go off for one minute when the rainfall reaches the preset value and the rain alarm indicator will flash. Once the rain alarm is on the indicator will not stop flashing unless is pressed or the rain alarm value is changed. To stop the alarm and reminder beep, press any button or change the rainfall alarm value. To deactivate the alarm, press . 4/6/05, 5:46 PM TEMPERATURE OUTDOOR The outdoor temperature is displayed on the 3rd line of the LCD display. Use the °C / °F button to select between Centigrade and Fahrenheit display units. [. . . ] Here are a few precautions: · · Do not immerse the unit in water. They may scratch the plastic parts and corrode the electronic circuit. Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. [. . . ]