User manual OREGON SCIENTIFIC JM888-RADIO CONTROLLED OUTDOOR WALL CLOCK WITH THERMOMETER

[. . . ] 3 Placement of Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Radio Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Radio reception signal - Indicates the condition of radio reception 9. 7. GETTING STARTED UNPACKING THE PRODUCT When you unpack your clock, make sure to keep all the packing materials in a safe place, in case you need to later transport or return it for servicing. In the box, you will find: · Clock unit · Batteries · User manual BATTERIES 3 JM888_EN_output 3 10/11/2004, 10:59 EN EN NOTE ON WHERE TO PLACE THE UNIT This unit is designed for outdoor usage. When the unit is relocated from one place to another in extreme temperatures (e. g. from a very hot area to a very cold one), water condensation may occur on the lens at the front. In this case, leave the unit in the same location for 2-3 hours and the water condensation will disappear. When the unit is placed under direct sunlight, the accuracy of the temperature display may be affected. TEMPERATURE DISPLAY After battery installation, the unit immediately reads and displays the surrounding temperature. ENABLING / DISABLING RECEPTION To manually disable the reception of the radio clock signal, press and hold the DOWN button for 2 seconds. To enable the radio reception signal, press and hold the UP button for 2 seconds. (The radio reception signal will reappear on the LCD display). SETTING THE CLOCK MANUALLY To adjust the clock settings manually without automatic RF synchronization, remember to disable the radio reception first. Select the time zone offset (+/- 23 hours), 12/24 format, hour, minute, year, calendar format (M/D or D/M), month, day, language, and hourly chime on/ off. NOTE If no key pressed after 1 minute, it will automatically return to local time display mode. NOTE The language options are (D) German, (E) English, (F) French, (I) Italian, and (S) Spanish. NOTE The hourly chime function when set to ON will beep once at the beginning of every hour. The chime icon will also show on the display. RADIO RECEPTION This product is designed to synchronize its calendar clock automatically once it is brought within range of the radio signal. NOTE When the unit is receiving the signal, the radio reception symbol with start to blink. Generally, complete reception takes around 2 to 10 minutes, depending on the strength of the signal. To select the most suitable radio signal for your location, slide the EU / UK switch to the appropriate setting. [. . . ] · Do not scratch hard objects against the LCD display as this may cause damage. 5 JM888_EN_output 5 10/11/2004, 10:59 EN EN TROUBLESHOOTING GUIDE BASIC FUNCTIONS This section includes a list of frequently asked questions for problems you may encounter. If your device is not operating as you think it should, check here before arranging for servicing. · Take special care when handling a damaged LCD display, as the liquid crystals can be harmful to your health. [. . . ]