User manual OREGON SCIENTIFIC BHB613

[. . . ] Please note that the accuracy of the weather forecasting is about 70 ~ 75 percent. A. WEATHER FORECAST WINDOW Weather forecast indication shows sunny, slightly cloudy, cloudy and rainy. B. PRESSURE READING WINDOW Displays the current pressure reading. C. D. PRESSURE TREND CHART WINDOW [SET] button To set the altitude FEATURES & KEY CONFIGURATION E. [UP] button Increases the value of setting by 10 F. [DOWN] button Decreases the value of setting by 10 G. [RESET] BUTTON Returns all settings to default value and erases all memories. A H. [hPa/mb-inHg] Slide switch Selects between hPa/mb or inHg display unit. B G C D H F E 1 GB GB BATTERT INSTALLATION The unit uses four UM-4 "AAA" size batteries. If the " indicator appears, removes the exhausted batteries and follow these steps to replace the batteries: 1. [. . . ] Weather forecast shows slightly cloudy (a sun with the cloud indicator ) b. Until that time has elapsed, the pressure trend and weather forecast symbols may not reflect actual weather forecast for your area. HOW TO READ THE ILLUSTRATED WEATHER FORECAST SYMBOLS Your weather station detects barometric pressure changes and the LCD displays the illustsrated weather symbols which indicating the weather forecast for 12 or 24 hours ahead, for an area with a radius of about 18-30 miles. Indicator displays on the unit Forecas Sunny Slightly Cloudy Cloudy Rainy AAA AAA HOW TO SET THE ALTITUDE 1. The 'ALT ' indicator will turn on with the altitude setting flashing (display in meter). The accuracy of a general pressure-based weather forecast is about 70% to 75%. Increase/decrease the altitude in steps of 10 meter by pressing [ ] or [ ] button. If the altitude has been changed, the ' ALT ' indicator flashing (about 15 minutes ) until a new sampling takes place and the pressure reading is then compensated with the new altitude. Press the [ SET ] button 6 times to confirm the setting you just entered or wait for one minute for automatic exit. Note: For monitoring the local barometric pressure reading, the user needs to select the 0 meter ( preset value ) for the altitude setting. For monitoring the Sea Level barometric pressure reading at certain altitude, the user needs to select the local altitude (-100 to 2500 meters i. e. To determine your location elevation, please either contact your local library, TV/ radio weather forecaster, or via Intenet at www. worldatlas. com/aatals/infopage/ elevation. htm. Important: 1. The accuracy of weather forecasting when using pressure trend alone is about 70 to 75 percent and, therefore, we cannot be held responsible for any inconveniences caused by an inaccurate weather forecast. 2 HOW TO SELECT THE BAR OR LINE CHART FOR THE PRESSURE TREND To get the line chart display, press the [RESET] button at the bottom of the unit while pressing and holding the [SET] key in the bar chart display. To get the bar chart display, press the [RESET] button once. Connector: Use wall-mount connector to align with other wall-mount bracket if necessary. - Note: Either action will reset the unit and the previous readings/ setting will be lost. Wall Mount Connector Wall Mount Bracket CONNECTOR Un-install the brackets: HOW TO SELECT THE PRESSURE UNITS OF MEASURE The switch in the battery compartment of the weather station selects between hPa/mb and inHg. To select inHg, set the switch to inHg. LOW BATTERY SIGNAL INDICATION If the voltage of the batteries becomes low, the " " indicator will be displayed. Replace the batteries when the " " indicator is displayed. TABLE STANDING OR WALL MOUNTING Table Standing : Your unit comes with stand connector for connecting it to the other modular units. MAINTENANCE When handled properly, this unit is engineered to give you years of satisfactory service. If the unit comes in contact with water, dry it immediately with a soft lint-free cloth. [. . . ] -- The contents of this manual may not be reproduced without the permission of the manufacturer. CUSTOMER ASSISTANCE Should you require assistance regarding this product and its operation, please contact our customer care department at 800853-8883 or via email at helpme@oscientific. com. WARRANTY This product is warranted to be free of manufacturing defects for a period of 1 year from date of retail purchase. Defective product should be directed to the place of retail purchase for exchange. Should this not be possible, contact our customer care department for assistance and a return material authorization. [. . . ]