User manual OPTICON OPR 3201

[. . . ] Gun-type Laser Barcode Scanner OPR 3201 The OPR 3201 is a gun-Type laser barcode scanner that uses a short-wavelength red laser beam to enhance the visibility of scanning lines. The decoded text of barcode images is output through an RS-232C, USB, or Wedge interface. Specifications Manual Opticon OPR 3201 Specifications Manual All information subject to change without notice. Document History Model Number: Edition: Date: OPR 3201 1A 2009-08-31 Specification Number: Original Spec Number: SS07067 SS07040 Copyright 2009 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. This official registration number is directly related to the device purchased. [. . . ] 41 Figure 35: Mechanical drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Abstract This manual provides specifications for the OPR 3201 Gun-type Laser Barcode Scanner. 2. Overview The use of a short-wavelength red laser beam enhances the visibility of scanning lines. The decoded text of barcode images is output through an RS-232C, USB, or Wedge interface, depending on the specification. add-on Codabar/NW-7 Code 11 Code 39 Code 93 Code 128 GS1-128 (EAN-128) GS1 Databar (RSS) IATA Industrial 2of5 Interleaved 2of5 ISBN-ISMN-ISSN Matrix 2of5 MSI/Plessey S-Code Telepen Tri-Optic UK/Plessey Postal Chinese Post Korean Postal Authority Code 2D Composite Codes MicroPDF417 PDF417 7 Opticon OPR 3201 Specifications Manual 3. Operating Temperature and Humidity Temperature: -5 to 50° C Humidity: 5 to 95% 4. 2. Storage Temperature and Humidity Temperature: -20 to 60° C Humidity: 5 to 95% 4. 4. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light Fluorescent light Sunlight 3, 000 lx 3, 000 lx 50, 000 lx 8 Opticon OPR 3201 Specifications Manual Figure 1: Ambient light immunity Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS: Resolution: Symbology: Quiet zone: N/W ratio: Distance: Angle (see note below): Curvature: Power supply voltage: 0. 9 0. 25 mm 9-digit Code 39 10 mm 1:2. 5 70 mm = 0° = 15° = 0° R= 6. 0 V (RS-232C) 5. 0 V (Wedge/USB) Direct light or specular reflection from a light source should be prevented from entering the acceptance area. Please see section 8 for how these values are defined. 9 Opticon OPR 3201 Specifications Manual 5. Controls Item ASIC SDRAM Flash ROM Specifications ARM7TDMI 64 KB 8 MBits (512 K × 16 bits) 6. Configuration The OPR 3201 consists of a laser module (which includes a scan mirror, a coil, and a photo diode), a decode and communication section (which decodes scanned data and carries out signal processing), a 3. 3 V power supply, an interface (which outputs decoded data), a buzzer, LEDs, and a trigger key. The OPR 3201 RS-232C model operates on a DC 6. 0 V power supply fed from the dedicated adapter. USB and Wedge models operate on bus power, so those models do not use an adapter. Figure 2: OPR 3201 configuration 10 Opticon OPR 3201 Specifications Manual 6. 2. Electrical Characteristics Interface Parameter Operating voltage RS-232C Operating current Rush current Stand-by current Operating voltage USB Wedge Operating current Rush current Stand-by current Min 4. 5 -- -- -- 4. 5 -- -- -- Typ 6. 0 100 550 35 5. 0 100 450 35 Max 6. 6 160 600 65 5. 5 160 500 65 Unit V mA mA mA V mA mA mA Notes 100 mA--Laser: ON, Buzzer: OFF 160 mA--Laser: ON, Buzzer /LED:ON Power supply voltage: 6. 0 V Auto trigger OFF/ON 100 mA--Laser: ON, Buzzer: OFF 160 mA--Laser: ON, Buzzer /LED:ON Power supply voltage: 5. 0 V Auto trigger OFF/ON Conditions Connect 1 resistance to a power supply line in series and measure the current by the voltage between both ends of resistance. The current value depends on the interface type and host computer to which the device is connected. 6. 3. AC Adapter The OPR 3201 with RS-232C serial interface is shipped with a dedicated AC adapter "Universal AC Adapter Kit. " Plug connectors can be changed for each region. See diagrams below. Item Model Name Dimensions DC output cable length Voltage range Input specifications Supply current Voltage range Output Specifications Operating temperature Maximum current Specification SFP0602000P-PSE 47. 5 (W) × 28. 0 (D) × 75. 0 (H) mm 1. 8m AC 90 to 265 V 0. 5 A max 5. 7 to 6. 3 V 2 A max 0 to 40° 11 Opticon OPR 3201 Specifications Manual 6. 3. 1. AC Input Dimensions: 47. 5 (W) × 28. 0 (D) × 75. 0 (H) mm (except protruding portion) Figure 3: AC adapter 1 6. 3. 2. Laser Scan Specifications Parameter Light-emitting element Emission wavelength Light output Scanning method Scanning speed Scan angle Specification Red laser diode 650 ±10 (25° C) 1. 0 or less Bi-directional scanning 100 ±20 Scan angle: 54 ±5 Read angle: 44 (Min) Unit -- nm mW -- scans/s ° ° Notes: Refer to chapter 16, "Trigger and Read Options, " to read about the scan modes. 12 Opticon OPR 3201 Specifications Manual Refer to chapter 8, "Technical Specifications, " to read about scanning performance. Tilt of Laser Scan Line Laser scanning tilt is the vertical difference between both ends of a laser scan line. · Up to 0. 92° angle in vertical direction from the scan origin (mirror motor). · Up to 2. 46 mm when measured at a point 150 mm from the scan origin. 7. 1. 2. [. . . ] Conditions Moving speed Angle Environmental temperature and humidity Environmental illuminance Conditions for the auto trigger 100 ±10 mm/s (direction is not specified) Skew Angle, excluding Pitch Angle and Dead Zone, is specified in section 0. Barcode sheet: OPTOELECTRONICS Test Sheet (white) Background: OPTOELECTRONICS Test Sheet (black) 2. Barcode sheet: OPTOELECTRONICS Test Sheet (black) Background: OPTOELECTRONICS Test Sheet (white) Figure 33: Auto trigger operation 40 Opticon OPR 3201 Specifications Manual 16. 2. Stand Detection Enabled: This option automatically enables auto trigger when the reader is inserted into a stand. [. . . ]