User manual OPTICON OPL 7836

[. . . ] Handheld Laser Barcode Scanner OPL 7836 The OPL 7836 is a handheld laser barcode scanner. Specifications Manual Opticon OPL 7836 Specifications Manual All information subject to change without notice. Document History Model Number: Edition: Date: OPL 7836 2A 2007-02-01 Specification Number: Original Spec Number: SS06100 SS06078 Copyright 2007 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. This official registration number is directly related to the device purchased. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. [. . . ] 35 Figure 28: Mechanical drawing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Abstract This manual provides specifications for the OPL 7836 barcode scanner. 2. The OPL 7836 enhances visibility by using a short-wavelength red laser beam when scanning lines. add-on Codabar/NW-7 Code 11 Code 39 Code 93 Code 128 GS1-128 (EAN-128) GS1 Databar (RSS) IATA Industrial 2of5 Interleaved 2of5 ISBN-ISMN-ISSN Matrix 2of5 MSI/Plessey S-Code Telepen Tri-Optic UK/Plessey Postal Chinese Post Korean Postal Authority Code 2D Composite codes MicroPDF417 PDF417 The OPL 7836 outputs the scanned barcode image via an RS-232C, USB, or WEDGE interface according to its specification. The OPL 7836 complies with RoHS. 7 Opticon OPL 7836 Specifications Manual 3. Operating Temperature and Humidity Temperature: -5 to +50° C Humidity: 20 to 85% RH 4. 2. Storage Temperature and Humidity Temperature: -20 to +60° C Humidity: 10 to 90% RH 4. 3. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light Fluorescent light Sunlight to 3, 000 lx to 3, 000 lx to 50, 000 lx Conditions Barcode Sample: OPTOELECTRONICS Test Sample PCS: Resolution: Symbology: Quiet Zone: N/W Ratio: Distance: Angle: Curvature: Power Supply Voltage: 0. 9 0. 25 mm 9-digit Code-39 10 mm 1:2. 5 85 mm = 0° = 15° = 0° R= 5. 0 V Direct light or specular reflection from a light source should be prevented from entering the acceptance area. Please see section 7 for how these values are defined. 8 Opticon OPL 7836 Specifications Manual 5. Electrical Characteristics Parameter Power supply voltage Operating current Rush current peak Stand-by current Startup time Symbol VDD IOP IPEEK IPRE TD Min 4. 5 - Typ 5. 0 85 450 35 100 Max 5. 5 150 500 70 - Unit V mA mA mA ms Remarks Buzzer Off Conditions · · · Connect 1 resistance to a power supply line in series and measure the current by the voltage between both ends of resistance. The current value depends on the interface type and host computer to which the device is connected. 6. Laser Scan Specifications Parameter Light-emitting element Emission wavelength Light output Scanning method Scanning speed Scan angle Specification Red laser diode 650 ±10 (25° C) 1. 0 or less Bi-directional scanning 100 ±20 Scan angle: 54 ±5 Read angle: 44 (Min) Unit -- nm mW -- scans/s ° ° Notes: Refer to chapter 15, "Trigger and Read Options, " to read about the scan modes. Refer to chapter 7, "Technical Specifications, " to read about scanning performance. Tilt of Laser Scan Line Maximum tilt between both ends of a laser scan line. Maximum of 3. 1 mm when measured at the point 150 mm away from the scan origin. (Measurement was done from the center of the scan line. 9 Opticon OPL 7836 Specifications Manual 6. 1. 2. Curvature of Scan Maximum gap between the straight line connecting both ends of the laser scan line and the actual laser scan line. Maximum of 3. 3 mm when measured at the point 150 mm away from scan origin. (Measured from the center of the scan line. ) Figure 1:Laser scan tilt and curvature 7. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Ambient temperature and humidity: Ambient light: Background: Room temperature (5 to 35º C) Room humidity (45% to 85% RH) 500 to 900 lx Barcode = black Space = white Margin = white Background of label = black 5. 0 V Approve the performance when decoding is successful in all ten tests. (Decoding is deemed successful when completed in 0. 5 seconds or less. ) Power supply voltage: Decoding test: 7. 1. [. . . ] The estimate of MTBF and product life cycle is based on standard operation of the product within the recommended temperature range and without extreme electronic or mechanical shock. 15. Trigger and Read Options The OPL 7836 has read and trigger settings as follows: 15. 1. Auto Trigger Sensor The product has an optional auto trigger setting, which starts barcode reading automatically by using sensor detection. The scanner starts barcode reading after detecting reflection from the surface when the auto trigger is used. [. . . ]