User manual OPTICOM SDVR 4000

[. . . ] DIGITAL VIDEO RECORDER SDVR 4000/8000/1600 SERIES NET VIEW SOFTWARE User's Manual CAUTION Read all precautions and instructions in this manual Disclaimer FX Series DVR before using Server. Save this manual for future reference. Disclaimer This manual has been reviewed thoroughly in order to provide a guide for SDVR Series DVR systems. All statements, technical information, and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted. They are not intended to be, nor should they be understood to be, perfect representations or warranties concerning the products described. [. . . ] Input IP set in DMZ on "IP" field and Gateway of ADSL modem on "Gateway" field. Similarly, for Subnet Mask, DNS address, input relevant values in IP sharer. Figure 3. 5. 2. Network setup screen - LAN Item IP GATEWAY SUBNET MASK DNS 3-5-2-2. LAN Description The fixed IP address of the DVR unit The IP address of the Gateway The subnet mask for the LAN The address for the DNS server An IP address is automatically assigned by the DHCP server, which automatically assigns IP address and other parameters to new devices. When ADSL or other network being used adopts variable IP method, not fixed IP. ADSL (PPPOE) Use ADSL (PPPoE) function when the network type is connecting through direct PPPoE method. If ADSL type is not using inputting IP and Password like VDSL or DVR is installed in IP sharer, a user can not select this function. ADSL Item ID PASSWORD The user ID for ADSL connection The password for ADSL connection Description 23 3-6. Storage User can set recording mode in the hard disk drive or initiate format of the hard disk drive. Storage setup Item OVERWRITE FORMAT USB UPGRADE Description Overwrite existing material when hard disk drive is full Format hard disk drive The firmware of DVR can be upgraded through USB port. In order to upgrade, the upgrade firmware must firstly be downloaded and copied into the USB device. Create a new folder in the USB memory stick and copy the upgrade firmware "app. bin" into the folder. ) After the upgrade firmware is copied into the USB memory stick, do the following; 1. SAVE SETUP TO A USB LOAD SETUP FROM A USB User can save the current configuration of DVR to the USB memory stick. Put the USB stick on the front panel and press SEL to start the saving process User can upload the configuration of DVR to another DVR using the USB Memory stick. Put the USB stick on the front panel and press SEL to start the loading process. After upgrade is completed, DVR will reboot automatically and setup value will be applied. Set the limit days for recording to the hard disk drive from 1 to 60 days. 24 Figure 3. 6. 1. Storage setup ­ SAVE SETUP TO A USB & LOAD SETUP FROM A USB 25 4. Live Window In the Live window, video inputs from the cameras are displayed on the configuration of the live setup. Various indicators showing the status of the DVR are shown as OSD symbols. Refer to Table 4. 1. 1 for the meanings of the indicators. Figure 4. 1. 1. [. . . ] Main controls in Live No 1 2 3 4 5 6 7 8 Name DATE & TIME CONNECT SEARCH LIVE DISPLAY MODE PAUSE CAPTURE SETUP PAN/TILT Description Displays the current date and time. Click this icon to connect to the DVR Click this icon to search for recorded video. Use these buttons to control the PAN/TILT features on the remote camera. 9 ZOOM/FOCUS Use these buttons to control the ZOOM/ FOCUS features on the remote camera. [. . . ]