User manual OPTICOM OWL REV1.3

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual OPTICOM OWL. We hope that this OPTICOM OWL user guide will be useful to you.


OPTICOM OWL REV1.3: Download the complete user guide (15005 Ko)

Manual abstract: user guide OPTICOM OWLREV1.3

Detailed instructions for use are in the User's Guide.

[. . . ] Safety precautions 2 Failure to follow these instructions could result in serious personal injury or death. Failure to follow these instructions could result in personal injury or property damage. Notifies user of references to use conveniently. Install this equipment avoiding a direct ray of light, heats and moistures. -Doing not, can result in lowering efficiency, electric shock or fire. [. . . ] - WRITE LOG :Select to write LOG info. Chapter IV 53 SYSTEM Sets how to operate event related with DISK mainly. DISK FULL Sets when HDD is full of record. DISK ERROR Sets when there is an error on HDD. S. M. A. R. T Enables the system to prevent possible malfunction of HDD by interfacing between system and HDD. If you found "BAD HDD" mark in the S. M. A. R. T function, please exchange HDD as soon as possible 54 Chapter-V. SEARCH Chapter V 55 SEARCH 3 1 2 1 Playback Screen : Record Playback 2 Playback Time 3 Display Status : Playback Time Display Playback Icon Pause ( ) Playback ( ) Multiple Playback( , , ) It randomly shows the first searched record file when it goes to SEARCH MODE. This type is the same as on event search , so it is possibly not to shows The exact record file searched . Chapter V 56 SEARCH MENU DISPLAY Select screen division mode. (1, 4 spirit) CALENDAR SEARCH Select date , hour, minutes, seconds in turn on calendar search. When you click MINUTE, you can find specific record status as right below. Chapter V 57 Section is Generated and maintained recording data that occurs duplicating data returning previous time by any cause during DVR operating Time progress Section#1: Sectoin#2: EVENT SEARCH It shows all EVENT record list. If you click related EVENT, It plays that event promptly. It may not be the same channel image as shown on EVENT LIST because it shows the first display image recorded at that time zone. SEARCH KEY Can be selectable on EVENT search. -MOTION/SENSOR/VIDEO LOSS :Selectable per each camera Chapter V 58 DATE/TIME SEARCH Search data by Date/Time . You can search the event promptly When you know the exact event time. FIRST Move to first part of recorded DATA. It is useful to set a bookmark as starting time while search the data. PLAYBACK USER INERFACE Playback buttons appears when locate the mouse pointer at the bottom of screen Chapter V 59 DEVICE Search internal or external SYSTEM DISK . LOCAL DEVICE Search the data of internal DISK. BACKUP DEVICE Search backup device (Select when you play the backup data. ) If there are various back up devices , you can select a specific one . 60 Chapter-VI. Client program Chapter VI 61 REMOTE 1 4 3 5 7 6 10 8 2 9 <REMOTE PROGRAM IS?> With connected to DVR remotely, it is to perform Remote Monitoring, Remote Search, Remote Backup etc. (Please install remote program from the program CD) Environment conditions for Remote Program 1. At least 10Mbps network speed (Max 100Mbps support) Please note that some buttons and graphics may not be activated at this moment. Those inactivated buttons will be used later when system upgrades and expands Chapter VI 62 1 Connection information and Button Shows DVR's name, IP address and connection status. DVR connection button. Add : Enter IP address and user authentication to connect DVR Modify Delete <DVR Connection Window> : Modify IP address and user authentication of the existing list : Delete existing use. DVR name : Specify a name that you can easily identify. Address : Specify assigned IP address to connect DVR (Type the Host name of REAL IP or DDNS. ) <New Connection/Modify Dialogue Window> Chapter VI 63 <What is IP address?> A set of address system that is used to find out destination in network access via Internet or LAN. IP address is divided into REAL IP and VIRTUAL IP, and REAL IP must be sent on DVR for the access from remote site via internet. You can be assigned with REAL IP Or DDNS service ID (Hostname of Dynamic Domain Name Server). Service Port :Set this the same as the service port assigned to DVR. <What is service port?> Function to make the virtual IP available to the devices such PC or DVR with Automatic connection to the specified service port when remote access is made To router via the router or IP Share of one REAL IP. (But this function is available Only when router or IP Share supports it. ) User Name : Type the user name authorized in DVR Password : Type the password authorized in DVR Save Authentication Information :Save Authentication Information 2 Program Information and Set up Program Information : Shows Remote Program's information. Program Setup : Sets up Remote Program. <Program Information Window> ( Language, Display Output, Resolution, Save Path, Network Speed Etc) Chapter VI 64 Language : To choose program's language. Video Display : YUV mode : According to your PC graphic card ability, the support can be decided. This mode shows faster, clear ability of image transmission than RGB mode. RGB mode : It is widely compatible with most graphic cards, and select this when YUV mode is not supported. . Resolution from 1024X768 starts : It always shows 1024 x768 when you check. . <Program Setup Window> <Recommended Graphic Card> ATI series : Radeon7000series (More then 32M), RADEON series. . . [. . . ] Preset Save : Save preset No. <Preset Move> <Preset Save> Chapter VI 83 Remote Search Playback Display Camera Name Green Border Line : Display the selected camera. Recorded Date/Time SECTION Selects section Section is created when Date/Time is changed to former times. Newly set Date/Time will be kept in section 1. . . . . . Chapter VI 84 Move & Event Search Move Button : Move to selected time Event Search Button : Popup the event search window Shows start and end time of recorded data. Moves to the time to search and press OK button. <Move Window> Select the time to event search Select events in detail. Select the camera to search. Click below Import button to list events. Shows current searched event lists. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE OPTICOM OWL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OPTICOM OWL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.