User manual OPTICOM 4 CHANNELS MPEG-4 DIGITAL VIDEO RECORDER V 1.2

[. . . ] 1. 2) 4 CHANNELS MPEG-4 DIGITAL VIDERO RECORDER About this user guide Before installing and using this unit, please read this user guide carefully. Be sure to keep it handy for later reference. The specifications and information are subject to change without notice for quality improvement. SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected "dangerous voltage" within the product's enclosure that may be strong enough to cause a risk of electric shock persons. WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Changes or modifications not expressly approved by the manufacturer may void the user's authority to operate this equipment. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 2 The bellow safety precautions must be followed. WARNING Do not use if the unit emits smoke, strange sounds are heard, or odor is emitted. Make sure there is no dust accumulation on the power plug or the outlet. [. . . ] Then ARCHIVE screen is displayed. Select VIDEO using buttons and press SEL button. Then DURATION screen is displayed. When STILL is selected, "STILL OK" is displayed and Still image is archived. Set the duration to be archived and backed up from the scene of video using buttons and press SEL button. VIDEO TYPE screen is displayed after "VIDEO OK" message. When the selected list is video, VIDEO TYPE screen is displayed. DVR: When DVR is selected, the video is backed up as an exclusive video format that can be played back using the exclusive viewer. Select AVI or DVR using displayed. buttons and press SEL button. Then BACKUP USB DEVICE screen is Select YES using message. buttons and press SEL button and select USB STICK using buttons and press SEL button. Then SAVING screen with backup status bar is displayed after "CHECKING USB" 35 After the backup is done, "SAVE SUCCESS" message is displayed. 5-3. Then SEARCH screen is displayed. Go to ARCHIVE field using buttons and press SEL button. Then LIST screen is displayed. Select the Still image (JPEG) or video (AVI) from the list using buttons and SEL button. Then paused image or the first scene of the video is displayed. Press CAPTURE button. Then VIDEO TYPE screen is displayed. 36 Select AVI or DVR using displayed. buttons and press SEL button. Then BACKUP USB DEVICE screen is Select YES using message. buttons and press SEL button and select USB STICK using buttons and press SEL button. Then SAVING screen with backup status bar is displayed after "CHECKING USB" After the backup is done, "SAVE SUCCESS" message is displayed. 37 5-4. Playback of AVI or DVR (Exclusive video format) video backup data Playback of AVI format: AVI format video can be played back by Window Media PlayerTM or other media player that is compatible with AVI format video. When PC doesn't have proper MPEG-4 CODEC, the media players can not playback the AVI format video. DVR (Exclusive video format): DVR format video can be played back by the player (the exclusive viewer) that the DVR copies on USB thumb drive with video. Three files are copied on USB thumb drive - DVR file: Exclusive format video file. The default password is 1111, which can be entered by pressing the up button 4 times and then pressing the SEL button. LIVE Item OSD SEQUENCE SEQ-DWELL TIME EVENT BEEP OSD CONTRAST CHANNEL DISPLAY SEQ LIST BRIGHTNESS CONTRAST HUE SATURATION VGA SCREEN MODE ERROR ALARM Description Enable/disable OSD (on-screen-display). Enable/disable sequential display of video channels in full screen mode. Enable/Disable internal beep when motion is detected or the alarm is triggered. Set the visibility level of the On Screen Display (OSD) Select the channel for applying the following settings. Enable/disable display of the video channel in live display mode Enable/disable the specified channel to be included in sequential display mode. [. . . ] Check the IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS. 2. Input the IP address or Domain name address that you pre-registered on www. ddnscenter. com on the address field and press "Go". 3. Enter IP address (or Domain name address that you pre-registered on www. ddnscenter. com), Port number and Password and click "Connect" Server address: Input IP address of the DVR from SETUP>SYSTEM>DESCRIPTION>IP ADDRESS or Domain name address that you pre-registered on www. ddnscenter. com Port: Input Port number (The number sets on SETUP>NETWORK>PORT) Password: Input Password (The number sets on SETUP>SYSTEM>NETWORK PASSWORD 7. Then the cameras connected to the DVR are displayed on the screen. 63 APPENDIX: How to connect network A. [. . . ]