Detailed instructions for use are in the User's Guide.
[. . . ] Contents
Before Using Your DVD Player 2
DVD Player
Getting Started
DV-SP500
Instruction Manual
Basic Playback
Advanced Playback
Thank you for purchasing the ONKYO DVD Player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new DVD Player. Please retain this manual for future reference.
Function Setup
Others
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
RISK OF ELECTRIC SHOCK DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · Pressing 7 twice causes the disc to return to the beginning when £ is pressed again. The display shows the disc type (DVDs or Video CDs).
OPEN / CLOSE
Press 0.
The disc tray comes out.
Remove the disc.
2
Notes
PLAY
Press £.
Playback starts from the resume position.
4
· The actual restart position may be slightly before or after the resume position. · If you want to remove the disc, but still want to resume playback from the last stopped position, use the LAST MEMORY feature instead (page 34). · The memorized resume position is erased when you open the disc tray, or change the Parental Lock Level setting (page 51) or On-screen Display (OSD) setting (page 47).
STANDBY
Press STANDBY (STANDBY/ON on the front panel ).
The disc tray goes back in.
22
ON
TV ON / STANDBY
OPEN / CLOSE
STANDBY
ANGLE
AUDIO
SUBTITLE
Still Frame/Slow Play
The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame.
8
LAST M
COND. M
DIMMER
DISPLAY
TOP MENU
MENU
CH -
VOL +
CH +
ENTER
VOL -
RETURN
SETUP
TV/ VCR
PAUSE
STOP PLAY
£
UP
FR
FF
DOWN
STEP/ SLOW
1 4 7 +10
2 5 8 0
3 6 9
SEARCH
+ FUNCTION M
STEP/SLOW +/
CLEAR
RANDOM REPEAT
A-B
PROGRAM
REMOTE CONTROLLER RC-449DV
DVD
TV
DVD
VCD
DVD
VCD
Viewing a still frame
PAUSE
Viewing slow playback
You can't use slow reverse play with Video CDs.
Press 8, STEP/SLOW +/.
When viewing a DVD, if the paused picture shakes, select the [Field] setting in the Setup screen Video 1 menu [Still Picture] setting as described in the section on page 46.
1 2
STEP/ SLOW
+ -
STEP/ SLOW
During still frame playback, press and hold STEP/SLOW +/ during playback.
+ -
STEP/ SLOW
+ -
Press STEP/SLOW +/ repeatedly to change the slow-motion speed.
There are four forward slow-motion play speeds:
3 1/16 1/2 2 3 1/8 1/4 2
I Frame by frame advance playback: Viewing one frame at a time
You can't use frame review with Video CDs.
1 Press 8, STEP/SLOW +/. 2 Press STEP/SLOW +/.
STEP/SLOW +: The picture advances one frame each time the button is pressed. STEP/SLOW : The picture backs up a DVD a few frames each time the button is pressed.
There are two reverse slow-motion play speeds: Slow 1 Slow 2
I To return to normal playback
When viewing a still frame playback, pressing 8 or £ restores normal playback operation.
Notes
· There is no sound when viewing still frames or slow playback, or when advancing one frame at a time. · Still frame, slow play, or frame advance playback may not be possible with certain titles. In this case, the mark is displayed.
I To return to normal playback
When viewing a slow playback, pressing £ restores normal playback operation.
23
Locating a Specific Title/Folder/Chapter/ Track/Location
DVD
VCD
CD
MP3
Searching for a Title, Folder, Chapter, Track, or Location on a Disc
This player offers different ways of accessing the information on a DVD, Video CD, CD or MP3. Using SEARCH, you can search for titles or chapters on a DVD, tracks on a Video CD, CD or folders or tracks on a MP3 and even select the point in time to start playback.
Notes
· For some discs, selection can be made using the top menu on the DVD. In this case, press TOP MENU to display the menu screen and then make your selection. · With some DVDs, the search operation may not be possible and may stop shortly after being performed. · When performing DVD or Video CD time search, playback may start from a slightly different time than that specified. · Search using time search is not possible during PBC playback of Video CDs.
1
SEARCH
Press SEARCH repeatedly to select the type of search.
The type of search changes which each press as follows.
DVD
3 Title Off 2 3 Chapter Time 2 3 Time Off 2
I To perform a direct title or chapter/track search using the number buttons
· Press the number buttons while the disc is stopped to select a title or track number. · Press the number buttons while the disc is playing to select a chapter or track number.
· To select number 3, press 3. · To select number 37, press +10, +10, +10 and 7.
Video CD
3 Track
CD
3 Track 3 Off
MP3
3 Folder Off 2 3 Track
2
1 4 7 +10 2 5 8 0 3 6 9
Press the number button(s) of the desired title, chapter or track or of the specific time where you would like to begin playback.
· To select number 3, press 3. · To select number 87, press 8 and 7.
When performing a time search:
· To select 21 minutes, 43 seconds, press 2, 1, 4, and 3. · To select 1 hour, 14 minutes, press 7, 4, 0, and 0.
3
PLAY
Press £.
Playback of the selected title, folder, chapter or track starts. When a time search is performed, playback begins at the appointed time.
24
ON
TV ON / STANDBY
OPEN / CLOSE
STANDBY
ANGLE
AUDIO
SUBTITLE
LAST M
COND. M
DIMMER
DISPLAY
TOP MENU 2/3/5/
TOP MENU
MENU
CH -
VOL +
CH +
MENU ENTER £
ENTER
VOL -
RETURN
SETUP
TV/ VCR
PAUSE
STOP PLAY
FR
FF
DOWN
UP
STEP/ SLOW
1 4
2 5 8 0
3 6 9
SEARCH
+ FUNCTION M
Number buttons
7 +10
CLEAR
RANDOM REPEAT
A-B
PROGRAM
CLEAR SEARCH PROGRAM
REMOTE CONTROLLER RC-449DV
DVD
TV
MP3
Using the MP3 Navigator
Use the MP3 Navigator to make searching for the track(s) you want to play easier. You can also use it to add or clear tracks from the program list.
I Navigate using the following controls:
Cursor buttons (2/3) Cursor buttons (5/) Select folder and tracks from the current screen. To move rapidly up or down a long list of folders or tracks, press and hold the Cursor buttons (5/). [. . . ] · The DVD Player is in repeat playback mode, memory playback mode, or random playback mode, etc. · Power supply fluctuations or other abnormalities such as static electricity may interrupt correct operation. · There is a Video CD, CD or MP3 loaded in the player and the setting that was changed only applies to DVD performance. · The [Setup Menu Mode] is set to [Basic].
13
Playback doesn't follow the course of the disc's programs. [. . . ]