User manual ONEFORALL URC 7930

[. . . ] Guide In TV and/or DVD mode you will obtain the "Guide" function (if available on your original remote). Menu Key The MENU key controls the same function as it did on your original remote. Directional Keys If available on your original remote, these keys will allow you to navigate through the menu mode of your device. Volume +/- Keys These keys operate in the same way as the keys on your original remote. [. . . ] Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). Now press CH+ over and over, until your Television turns off (everytime you press the CH+ key the ONE FOR ALL 3 will send out a POWER signal from the next code contained in the memory). You may have to press this key many times (up to 150 times) so please be patient. If you skip past a code, you can go to the previous code(s) by pressing the CHkey. Remember to keep pointing the ONE FOR ALL 3 at your Television while pressing this key. As soon as your television turns off, press the M (MAGIC) key to store the code. Please try pressing a "number" key or the "TV-text off" key to switch your TV back on. - To search for the code for another device follow the instructions above only press the appropriate device key instead of TV during step 2. - If your Video's original remote control does not have a POWER key, press PLAY instead of POWER during step 5. Once you have Set-Up your ONE FOR ALL 3, you can blink back your SET-UP CODE for future reference. Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). For the first digit of your four-digit code, press 1 and count all the red blinks. This is useful if you want to set up two of the same devices on the ONE FOR ALL 3. Example 1) Example 2) Example 1: To program a second Television on the VCR key (for example), you need to change the VCR key into a TV key, so press: (*) The VCR key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) Example 2: To program a second Television on the DVD key (for example), you need to change the DVD key into a TV key, so press: (*) The DVD key has now become a second TV key. Now enter the Set-Up code for your second TV by pressing: (*) (**) (**) if you want to program a second TV on the VCR key. Resetting a Device key Example: To reset the VCR key to its original mode, press: (*) Example: To reset the DVD key to its original mode, press: (*) (**) Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice. You may be able to use some functions of your Television, Video recorder or DVD player at the same time. For example: if you are watching a program on your video recorder, you can adjust the volume (a TV function) without pressing the TV mode key on your ONE FOR ALL 3. Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). Then press the Volume (-) key and the red light will blink four times. [. . . ] Once you obtain(ed) your function code(s) from customer service, programming the code is easy: 1 2 Press the device key (TV, VCR and DVD). Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). To cancel the , , Volume Punch Through": 1 Press and hold down the M (MAGIC) key until the red LED underneath the POWER key blinks twice (the red LED will blink once then twice). /ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. [. . . ]